Topic starter
Just fitted some new 150mm revs to my trail bike. Not had RS forks before, followed the guidelines on the guide on the fork leg which matches the book, and the sag with equalized pos and neg is way short of the 25% I sually run.
I am 10.5 st and am firmly in the printed guideline 140 - 160 lb rider weight = 90-105 psi (I went 95psi)
So are the guidelines in general way wrong ?
Posted : 07/03/2012 2:27 pm
If I ride my 2010 revelations with the "right" pressure according to the chart on the leg, they are far to stiff.
I'd go with setting the sag by trial and error rather than using the guide on the forks.
Posted : 07/03/2012 2:31 pm
Yes they're always too high. Ignore them and set the pressure based on achieving the right % sag.
Posted : 07/03/2012 2:31 pm