Forum menu
if it has no small bump sensitivity try all compression damping off - zero - floodgate open
I must still not have enough -ve air pressure because I was trying to get all the air in quickly and detach the pump before I lost all the pressure!
as bigdon says this should be fine - the hiss you hear should just be the pressurised air from the pump tube escaping. I would avoid going above the +ve pressure to start with - start with equal or slightly less. My -ve valve does leak oil and air over a while though.
oooohhhhhhhh I'm telling!!!
she's worse than me actually! but we are soooo losing our deposit on that flat....
Just wondering if the tuning advice would given here would be similar for 2010 Sid Teams?
Just got some and thought the instructions to be lacking...
bigdonx - MemberYou shouldn't lose air with the pump attached unless there is a fault of some sort - yes if you detach/reattach the pump you will get a drop from what it was before - but should not keep losing pressure.
Exactly.
Important question - are you losing pressure over time while the pump is attached?
If you are then there is a problem that might explain the lack of small bump sensitivity!
Oh, and dekerf, yes, SIDs are essentially the same.