Forum menu
really wide dropped...
 

[Closed] really wide dropped bars?

 ton
Posts: 24281
Full Member
Topic starter
 
[#9959402]

looking for some really wide dropped bars for my tourer.

48cm across the tops if possible.

crust bikes in the US do some, but cant source any over here.

nitto noodles are the nearest.

anything else anyone?


 
Posted : 25/04/2018 11:12 pm
Posts: 1730
Free Member
 

Alpkit spitfires are available in 46cm, not sure if that's the tops or the drops though...


 
Posted : 25/04/2018 11:31 pm
Posts: 17395
Full Member
 

Midges?


 
Posted : 26/04/2018 12:24 am
Posts: 43955
Full Member
 

Dropped bars.

Bibtights

Got something you want to tell us Tony?


 
Posted : 26/04/2018 12:35 am
Posts: 17331
Full Member
 

46 is easy to find,48 not so. I have 46 on two bikes, both Ritchey. One on fixed, the other cross, mainly for honking and control.

Despite being quite small, I have broad shoulders. Don’t really notice much difference to 44s if I’m honest.


 
Posted : 26/04/2018 1:34 am
Posts: 0
Free Member
 

Ribble have a good selection of 46cm


 
Posted : 26/04/2018 1:42 am
Posts: 234
Free Member
 

Funn G-wide, I was going to stick a pair of the 50cm on my cx bike but then I sold it. Available in 48cm and 50cm

http://www.funnmtb.com/mobile/products_detail.php?id=783


 
Posted : 26/04/2018 7:19 am
Posts: 9218
Free Member
 

http://www.planetx.co.uk/i/q/HBNIRM3/nitto-rm-3-gravel-handlebar

52-58cm wide at the drops, but 27.5cm wide on the tops.


 
Posted : 26/04/2018 8:04 am
 ton
Posts: 24281
Full Member
Topic starter
 

Got something you want to tell us Tony?

yes mate.   packed mtbing in.    too much pain when riding anything rough.


 
Posted : 26/04/2018 9:32 am
Posts: 0
Full Member
 

Someone mentioned the Love Mud Spitfire above so I measured mine.  44cm are 46cm edge to edge on the tops (which are double wrapped), 51cm at end of the slightly flared drops

So I'd guess the 46 would be 48 and 53cm?   Anyway, they are great bars, wee bit of back sweep and flare, very comfortable.


 
Posted : 26/04/2018 11:27 am
Posts: 0
Free Member
 

Genetic Digest bars on SJS are available as 48cm.


 
Posted : 26/04/2018 11:58 am
 Andy
Posts: 3348
Free Member
 

Lot of flared bars like the Nittos and Digests  are wide at the drops but quite narrow where the hoods are. Whyte shipped one of their bikes with genuine 50cm wide at the hoods bars, but not seen any for sale separately.

Really like my 46cm Cowchippers as they are 46cm at hoods and wider on the drops with the 24 degree flare.


 
Posted : 26/04/2018 12:38 pm
 Andy
Posts: 3348
Free Member
 

These look good, but are expensive and Id want to check are actually 50cm at the hoods and not just at the drops

https://www.ebay.co.uk/itm/Carver-Bikes-Breitbar-50cm-Aluminum-Drop-Handlebar-31-8mm-Clamp/263205277713


 
Posted : 26/04/2018 12:56 pm
Posts: 1413
Free Member
 

Whyte shipped one of their bikes with genuine 50cm wide at the hoods bars, but not seen any for sale separately.

I think they ship the Gisburn, Glencoe and the Friston with the 500mm bars, just picked up a cheap Gisburn and really like the wider bars on it. May be worth giving them a call to see if they'd sell a set.


 
Posted : 26/04/2018 1:01 pm
Posts: 1014
Free Member
 

https://crustbikes.com/products/wide-load-bar/


 
Posted : 26/04/2018 4:58 pm
Posts: 0
Free Member
 

Dropped bars.

Bibtights

Got something you want to tell us Tony?

Meh. Bibs and baggies FTW. Liner shorts are crap. 😁


 
Posted : 26/04/2018 5:44 pm
Posts: 0
Free Member
 

Hi,

Funn G-Wide is currently the widest one available on the market, apart of custom Black Sheet Ti.

My G-Wide unboxing (sorta 🙂 ) and first impressions.

https://krzywekolo.wordpress.com/2018/01/28/bbbh/

It is 520 on the hoods and 625 on the drops, however Genetic Digest is 480 on the hoods and 620 on the drops.

I would consider these 2...

Some other Dirt Drop Bars compared, with English commentary:

https://krzywekolo.wordpress.com/2018/02/03/dirt-drop-bars/

Cheers!

I.


 
Posted : 27/04/2018 12:14 pm
Posts: 12528
Full Member
 

can anyone see on the crust page how wide that bar actually is?


 
Posted : 27/04/2018 12:52 pm