One of those easy reading kinda threads, just vaguely interesting but I still feel the need to contribute:
1 x 20" Kids bike for riding to the shops/gym and back
1 x Identiti Krisis, waiting on inner tubes and star nut in the post and steerer to be cut down from new rigid forks, it'll then work but be rigid, ss, chainless and brakeless, soon to have chain the right length when I scrape my pennies together to buy a tool.
Yes I'm a student!
4 working
1 project in bits
1 frame with broken gear hanger inherited off a mate, may get track ends fitted one year
1 spare frame
6 of 8
Orange Subzero - frame still broke after alps (in 2008) I will do something about it eventually
Orange 5- running fine after recent rear shock rebuild
On-one single speed running fine after recent new cranks
On-one 29er running fine after recent new mechs
On-one scandal - need to get around to fitting new cranks and bottom bracket I have had sitting on the work bench for nearly a year
giant road bike running fine
Rock Lobster 853 - new build nearly finished just in time as jnr Inbred is now big enough to go on the back in his seat 🙂
Wifes bike is working as well
This is a bit complicated...
1 frame on shed wall (01 Stumpy fsr) so unrideable...
Inbred is rideable but forks need service & front brake needs bleeding. It also needs a clean & the down tube helicopter taping.
2010 is back at lbs for warranty stuff - pics to follow at some point. It's ready to collect, but seeing as it's not here, it's unrideable.
Hmmm, so that's 1/3 until I get to the lbs tomorrow.
1 of 1
All 36 of them.
8/9
1) mc battery rideable but needs a brake bleed after morzine
2) heavy bullit rideable.
3) Lightweight bullit rideable
4) BFe rideable but rear pads are close to the bone..
5) Pinarello road bike rideable
6) Spesh rockhopper circa 1992 rideable but in need of a full clean and service.
7) BMX rideable
8. dawes racer - no saddle, ****ed brakes
9) Motobecane racer rideable.
4/5
The FS is off to the welder on monday. Someone who knows what they're doing this time.
4 out of 6 are good to go 🙂
Trek road bike - ridable
Langster - ridable
Sanderson HT - ridable
Orange Sub 5 - ridable
Tinbred SS - bars/stem borrowed on the Sanderson
GT DHi - not fully built yet
A better ratio than sometimes!
Cheers, Rich
3/4, one in LBS awaiting parts.
One working.
One in the build phase and is likely to be for some time yet.
All bikes rideable
3/3 for the first time ever.
I was so pleased that I wrote a blog post.
http://harrythespiderblog.wordpress.com/2010/08/13/pottering/
Almost 2 out of 2!
The road bike is working well, but the ss ht (which I wanted to ride today) is missing a couple of bolts out of the grips so they spin around and fall off 🙁 new ones should arrive today though (even if it will be after I've left for work 😮 ) It is ridable though 😛
0/3. Two ruined BBs, one with missing spokes. All being fixed this weekend.
6 out of 7, I took the pedals off the SS road bike to use on a LBS demo bike and haven't refitted them yet.
6 of my 7, but the 7th only needs the pedals putting back on
10 out of 11 in my shed are fully functional
the 1 that isnt is a frame i just bought and am in the process of building - which will leave number 10 minus a back wheel & forks
3 out of 3. Very rare occurrence to have all of them working
...but they're in a garage so have probably all be nicked if hora's right. 😉
I was going to say inbred, you have quite a few similar bikes there, but toys, [b]2[/b] SC bullits[b]?[/b]
1 out of 3 MTBs running, road bike ok & in turbo trainer
5 bikes, 2 unrideable - my cross and road bikes because I did a sportive a couple of weeks ago which was crap weather so I used my cross bike with the road bike wheels but need to swap bit back round.
6 out of 7.
All.
2 old hardtail frames for t'wife and I in the loft for a rainy day/frame catastrophes, but they really are just bare frames rather than half completed bikes.
4 out of 6
Cube FS - Rideable
Genesis Altitude - Ridable
Bianchi 1885 Road Bike - Ridable
Specialized Tarmac - Ridable
Mrs MM's Specialied MTB - In bits awaiting upgrade
Giant XTC Frame will eventually be a single rigid single speed project. Have most of the bits lying around.
1 of 3.
Although if you factor in various other frames, it's 1 of 6. 😳
BMX: yep
456: yep
road bike: yep, although need some new shoes as they broke
touring bike/commuter: yep, went for a bit of an adventure on it last night in fact 🙂
single speed roadie: no (awaiting cast offs from road bike to make it work,upgrades already bought)
Sanderson: no, not yet decided on its exact build!
Cruiser: yep (rideable is debatable though!)
Sunn: no
all of them, however many that is.
Or is this willy waving over the number of bikes everyone owns? 😆
none at the mo 🙁
Inbred 456 needs gear cables and gears setting up... will sort them out tonight though with some help from iplayered radcliffe and maconie.. 🙂
singlespeed is halfway through getting gears put on it for the first time in about 5 years.. for a trans penine trail epic next week.. and has no fork either as we are trialing a higher front end on my G/F's bike this weekend..
commencal meta 5 has no wheels / rear derailleur cos theyve gone on the singlespeed..!
oh and the RTS frame is sitting on a shelf feeling unloved after being stripped down and built into the 456... 😉
One of two, but then, the 5spot has been in bits for the last 2/3months being hand stripped and then serviced and rebuilt in a new and interesting 1x9 and coil spring guise. Just waiting for my shock spring.
[img] 
[/img]
I had 4 bikes in various states of utter disrepair plus a Bullit that was/is mint.
I sold all the junk on ebay, it was worthless, but sold for enough to fund a new Carbon 456. So I know have two working bikes, though they're sharing a set of wheels at the moment as I haven'g to round to finishing the ones I'm building for the 456.
Every bloke needs a project bike, so I have a Mongoose Transfer for riding round the streets that is being worked on at the moment. It needs a broken bearing removing from the front wheel, disc brake adaptors, a front mech shifter and new bars.
[img] 
[/img]
3 out of 4 are currently fit for purpose.
The Mount Vision is currently missing its forks as they are having a little holiday at Locotuning. Wxpect them to come home all refreshed & full of bounce/beans!:)
3/4 working, though one is lent out to my brother, and the 4th is only in pieces as I stole the fork for another bike, bought some new un's now so should put #4 back together.
5 all working and ready to roll
4/4 --> all clean and working well, although new tyre needed on darkside soon...
SS
FS
Commuter
Darkside
All 5 rideable, one only just though - very old British Eagle.
4 out of 5-- the winter road bike is a pile of festering rust that I fear will need some money to get it rideable again. Every spring when I get the best roadbike out I resolve to clean, grease and fettle the winter steed before I forget it for another 8 months. I never do and every year the salt and filth damage gets worse.
2/3
Commuter bit dirty and disks rub
Chameleon bit dirty gears need indexing
Race/Plastic bike has an interesting scrape in its chain-stay currently off getting repaired/inspected.
5/6 number 6 has a broken frame
(I don't talk about the tireless bmx in the [unlocked] shed, despite hora's staements no-ones seen fit to rid me of that yet)
2/3, road bike and xc bike are fine commuter needs new wheels and is currently in bits while I nitromors the frame and forks. Forks took ages not looking foward to doing the frame.
Iain
2 of 3
The other just needs new wheel bearings fitting that are hopefully coming tomorrow.
2 are rideable out of 5
Blue pig is ready to go as is the cross bike.
Muddy fox is nearly ready, just needs some cranks as I borrowed the ones on it for the cross bike.
Pugsley is still a work in progress.
Could also probably build another 2 with all the bits so maybe 2 out of 7 really.
3 of 3 running, (Road/FS/Commuter) but do have two spare frames, numerous spare wheels & tyres, a couple of sets of spare forks, a couple of spare rear shocks, a couple of spare sets of bars, seatposts and stems, a spare saddle and a box of spare drivetrain bits so maybe its more like 3 of 5.
[url= http://i419.photobucket.com/albums/pp271/repackrider/avatar235.jp g" target="_blank">http://i419.photobucket.com/albums/pp271/repackrider/avatar235.jp g"/> [/IMG][/url]
[url= http://sonic.net/~ckelly/Seekay/mtbwelcome.htm ][b]2retro4u[/b][/url]
Marin County, Cali
Six
Road bike
3 FS MTB
1983 Ritchey
1994 Ritchey