Forum menu
Opinions please
 

[Closed] Opinions please

Posts: 0
Free Member
Topic starter
 
[#4986041]

4 of us out for a ride today - 1 of the group has an issue with his bottom bracket half way round. We find a bike shop and buy the parts to sort it out. The guy in the shop knows we've got about 20 miles to go, and all we have with us is trail tools. We ask if we could very quickly use a tool of his to fit the bits we've just bought from him (he's already told us he's not in a position to fit it for us) - to which he refuses out right. I think he's a bit of a cock - but am I being unreasonable?


 
Posted : 21/03/2013 11:56 pm
Posts: 43955
Full Member
 

Yes


 
Posted : 22/03/2013 12:00 am
Posts: 66112
Full Member
 

Problem of his own creation, really... Not reasonable to expect other people to bail him out.

Shops lending tools- shop tools are expensive, and if you lend stuff out there's a reasonable chance it goes missing or gets damaged, so there's good reasons not to lend to strangers. So I can't say he's a cock, but I think he's also possibly not the nicest human being- he's not been unreasonable but he could have done more.


 
Posted : 22/03/2013 12:04 am
Posts: 0
Free Member
 

name and shame


 
Posted : 22/03/2013 12:05 am
Posts: 2448
Full Member
 

Tough one. I've had people not return tools, so the next day I can't repair paying customers bikes. I'm out of business, have to shut the shop, and go and spend my own time and money replacing my own tools.

What tool were you after?


 
Posted : 22/03/2013 12:08 am
Posts: 0
Full Member
 

I take it you were going to do it there and then in front of the shop? Or at least in the very near vicinity?
Yeah, I'd say they're not coming across well- but what do I know?- I keep getting east and west mixed up.


 
Posted : 22/03/2013 12:46 am
Posts: 0
Free Member
 

I don't lend the tools I use to earn my living to anyone.

And if I'm asked I explain it exactly like that.

I would expect anyone else who uses tools to earn money to do the same.


 
Posted : 22/03/2013 12:51 am
Posts: 52609
Free Member
 

50/50 he could have been busy using the tools hence not able to fix your mates bike. Also as above stuff goes missing, gets covered in crap/damaged etc.


 
Posted : 22/03/2013 12:51 am
Posts: 0
Full Member
 

Neal- what if they were going to do the job as you watched, then hand them straight back to you?
You didn't sell a guy on a ride with his mates a bb recently did you?
I can understand your point though..


 
Posted : 22/03/2013 1:10 am
Posts: 0
Free Member
 

I've lost track of the number of tools I've lent out and not got back - up to and including a £150 BB facing tool.


 
Posted : 22/03/2013 1:48 am
Posts: 0
Free Member
 

Neal- what if they were going to do the job as you watched, then hand them straight back to you?

Probably not, some of my stuff is pretty easy to damage and cost a fortune.
Anyone who knows how to use them properly, would have their own.
Plus, I can't afford to replace them, and without them I can't earn.

You didn't sell a guy on a ride with his mates a bb recently did you?

No I don't work in the same trade.

I can understand your point though..

Good 🙂


 
Posted : 22/03/2013 2:06 am
Posts: 52609
Free Member
 

one local shop had a sign
"The guy who lends out tools is out buying more tools"


 
Posted : 22/03/2013 2:44 am
Posts: 0
Free Member
 

If you were going to do it in front of his very eyes in his shop and he wasn't using them himself then I'd say he's being unreasonable - given that it's very hard to damage a BB spanner. If you were going to walk outside then I can understand his reticence...


 
Posted : 22/03/2013 8:30 am
Posts: 0
Free Member
 

Yes.
It usually escalates.
Can I borrow a spanner?
Can I borrow a preload tool?
Can I take over a corner of the shop and make a mess?
Can I borrow a hammer?
Its stuck.Have you got a bar?
I've dropped the spacers-can I have some more?
Can you face it whilst I'm here?
Can I have some anti seize?
It won't go in,what have I done wrong?
Why are my cranks stiff?
Can you check I've done it right?
I gave you back the spanner?
It wasbroken when you gave it to me.
I never borrowed a hammer?
Closely followed by slating the poor 'customer service' to anyone who'll listen.


 
Posted : 22/03/2013 8:34 am
Posts: 17333
Full Member
 

If you were going to fit the part in the shop, then I'd say yes. Or you could have bought the tool from his shop - assuming he had one in stock to sell (BB spanner by chance?). Perhaps that's what he was hoping, an extra £20 for a tool.


 
Posted : 22/03/2013 8:39 am
Posts: 17333
Full Member
 

If you were going to fit the part in the shop, then I'd say yes. Or you could have bought the tool from his shop - assuming he had one in stock to sell (BB spanner by chance?). Perhaps that's what he was hoping, an extra £20 for a tool.


 
Posted : 22/03/2013 8:39 am
 Drac
Posts: 50604
 

Reminds I must get my tools back I lent out for one quick job should be done, 2 years ago now.

Seems silly but as mentioned his tools are his living.


 
Posted : 22/03/2013 8:40 am
Posts: 0
Free Member
 

given that it's very hard to damage a BB spanner

I've also lost track of the number of BB tools I've broken - and I'm a professional.


 
Posted : 22/03/2013 8:45 am
Posts: 3228
Full Member
 

You either lend your stuff to anyone who asks, and risk loss or damage, or you do not lend at all. LBS guy can't be making judgements on everyone's trustworthiness.


 
Posted : 22/03/2013 8:50 am
Posts: 0
Free Member
 

I used to keep a box of 'customer tools' for such occasions (in my younger less before I had the humanity drained from my soul).I was emptied in 2 weeks.Used to keep a track pump on a chain for customer use...got nicked,got replaced,got nicked,got replaced,got nicked,gave up.


 
Posted : 22/03/2013 8:55 am
Posts: 0
Full Member
 

He's also on dodgy grounds with his insurance possibly. I doubt very much that his public liability insurers would be too delighted if a customer got injured using shop tools and shop workshop space, got injured and sued.

Also, 5 miles into the ride, bb falls out, rider falls off and dies (or worse still from purely an insurance view is in a wheelchair for life), shop gets the blame for letting an inexperienced mechanic use their stuff etc and family sues.

Its crap I know but that's the way these things work (I'm an insurance underwriter, I see claims like this - it does happen).

Cheers

Danny B


 
Posted : 22/03/2013 9:04 am
Posts: 0
Free Member
 

I think it depends on the way the whole thing panned out,

Scenario 1; you go into the shop, explain the fact that your stranded 20miles from home and need a repair to get you home, he recommends the parts needed for the fix and sells them to you and only then turns around and says you can’t use any workshop tools, then he’s being a bit of a cock.

Scenario 2; you go into the shop, ask for XYZ, which he sells you and then when you explain the situation he refuses to lend you the tools, then it’s more understandable.

In either situation I would want a refund on the parts that I’d just bought which were effectively useless. The next time your mates want some new bikes/shoes/shorts etc. and need to try some on for size before buying cheaper online I can guess where they’re going!


 
Posted : 22/03/2013 9:26 am
 br
Posts: 18125
Free Member
 

I broke a pedal and bought a new set from Alpine bikes (in Glentress). I asked the chap if I could also borrow a large allen key to get the pedal off, and they offered my the use of the workstand too.

Also I snapped a seatpost (towards the end of a ride) and went in looking for an I-Beam one, they didn't have any but offered me a lend of a demo post/seat so I wouldn't spoil my day.

But, it depends on the circumstances and I'd have asked before buying the BB.


 
Posted : 22/03/2013 9:26 am
 Drac
Posts: 50604
 

In either situation I would want a refund on the parts that I’d just bought which were effectively useless.

A nice credit note for you then as there's nothing wrong with the parts.


 
Posted : 22/03/2013 9:29 am
Posts: 1980
Full Member
 

I understand all the arguments about not lending tools but not helping a customer to find a solution to a problem like this is not a good way to build a business. Assuming it's an external BB it's a 5-minute job (or a low-risk lend) that will make the difference between winning goodwill or getting roasted on the Internet.


 
Posted : 22/03/2013 9:37 am
Posts: 0
Free Member
 

I think a lot depends on the context op. If you buy on line and keep your bike in order it can save you a lot of unpleasant trips to an LBS, and saves an LBS monkey the mental anguish of having to deal with your unreasonable/ robbing intentions.


 
Posted : 22/03/2013 9:43 am
 Drac
Posts: 50604
 

Agreed Cheezpleez lot to be said for extra customer service.


 
Posted : 22/03/2013 9:45 am
Posts: 0
Free Member
 

Does he sell BB tools? If so he's got a good reason to refuse.


 
Posted : 22/03/2013 9:58 am
Posts: 0
Free Member
 


Yes.
It usually escalates.
Can I borrow a spanner?
Can I borrow a preload tool?
Can I take over a corner of the shop and make a mess?
Can I borrow a hammer?
Its stuck.Have you got a bar?
I've dropped the spacers-can I have some more?
Can you face it whilst I'm here?
Can I have some anti seize?
It won't go in,what have I done wrong?
Why are my cranks stiff?
Can you check I've done it right?
I gave you back the spanner?
It wasbroken when you gave it to me.
I never borrowed a hammer?
Closely followed by slating the poor 'customer service' to anyone who'll listen.

You are right!


 
Posted : 22/03/2013 10:00 am
Posts: 0
Free Member
 

Yes, you are being unreasonable. If it had been me, I would have offered to fit it for you and charged you for the pleasure. Or I might have told you to go forth and multiply.

Never EVER ask a mechanic/engineer of any sort to borrow tools unless you know them very, very well. Know as in the biblical sense.


 
Posted : 22/03/2013 10:04 am
Posts: 119
Free Member
 

Would you go into a car garage and say can I borrow your ramp?


 
Posted : 22/03/2013 10:05 am
Posts: 10336
Full Member
 

He would have had to watch you doing it or risk losing the tool. He didn't have the time to do that. Personally I would have made you pay a deposit on the tool, credit card and then lent it


 
Posted : 22/03/2013 10:06 am
Posts: 0
Free Member
 

A nice credit note for you then as there's nothing wrong with the parts.

Not in scenario 1, the parts supplied don't enable you to fix the bike so are not fit for purpose.


 
Posted : 22/03/2013 10:13 am
 Drac
Posts: 50604
 

Not in scenario 1, the parts supplied don't enable you to fix the bike so are not fit for purpose.

Why then as that's the parts needed not having the tools to fix it yourself if nothing to do with part being not fit for purpose. That's like saying a TV is not fit for purpose as they didn't supply a HDMI cable or screwdriver to fit the stand on with.


 
Posted : 22/03/2013 10:37 am
Posts: 0
Free Member
 

How could

bits go missing
when
We ask if we could very quickly use a tool of his to fit the bits we've just bought from him
happened 😕


 
Posted : 22/03/2013 10:39 am
Posts: 0
Free Member
 

Would you go into a car garage and say can I borrow your ramp?

I would and have asked my the LBS if I can use their pump after having some work done in said LBS...

Same but different...


 
Posted : 22/03/2013 10:44 am
Posts: 0
Free Member
 

I won't even lend my tools to my mates anymore. Call me a grumpy old git if you like, but I've spent a lot of time and money gathering all the specialist tools I need to fix my bike, my mates haven't bothered, and expect to borrow mine. When I used to lend, they wouldn't come back, and I'd have to drive for an hour or so to retrieve them next time they were needed.

Instead, I now offer for them to bring their bike (and a couple of beers) over to my place on a Sunday and I'll help'em fix it. Works bettter for all concerned.


 
Posted : 22/03/2013 11:03 am
Posts: 0
Free Member
 

Bloody hell. I hope I never have the misfortune to shop in any of the LBS' owned by those here. A fellow rider with 20 miles left to cycle, and you wouldn't let him borrow a BB tool (for use in the shop), having just sold him a BB? Insurance? 😯
I Would have got a refund there and then. A refusal would have resulted in trying to waste the blokes entire day.


 
Posted : 22/03/2013 11:08 am
Posts: 0
Full Member
 

If you can sue your gym for falling off a treadmill or you can sue your employer when you get injured having a nail gun fight because they didn't give you training that said having nail gun fights was dangerous and wrong then you can sue your LBS for letting you use their tools and then getting injured on their premises or as a result of the work.

Those examples are taken from confirmed claims experiences (a document insurers provide to other insurers when looking at a piece of business) that I have seen with my own fair eyes.

The nail gun kid got £50k!

Cheers

Danny B


 
Posted : 22/03/2013 11:22 am
Posts: 0
Free Member
 

<goes to find a nail gun>

<remembers I'm self-employed>


 
Posted : 22/03/2013 11:24 am
 sbob
Posts: 5581
Free Member
 

willber - Member
We find a bike shop and buy the parts to sort it out

Well you obviously didn't.


 
Posted : 22/03/2013 11:30 am
Posts: 0
Free Member
 loum
Posts: 3624
Free Member
 

willber

Please post the shop name so that if I have a mechanical problem with 20 miles to go I know to push straight past it and not waste any time or money there.

He sounds like a bit of a cock.


 
Posted : 22/03/2013 11:45 am
Posts: 0
Free Member
 

He sounds like a bit of a cock.

Disagree. There are rules for tools.

Possibly mecahnic was being narky, but similarly maybe the OP could have helped things by buying a few extra inner tubes / energy bars / coffee.

As an ex-mechanic I don't lend my tools out, and they still manage to go missing.


 
Posted : 22/03/2013 11:51 am
Posts: 551
Free Member
 

Why didnt you just say "I will buy this part if you lend me the tool to fit it - the tool wll not leave this shop". If he says no then whats the point of buying it - wait till you get home then buy it on CRC for half the price.


 
Posted : 22/03/2013 11:51 am
Page 1 / 3