Forum search & shortcuts

Ooooops - Uppy Down...
 

[Closed] Ooooops - Uppy Downy Seat Post Content...

Posts: 0
Free Member
Topic starter
 
[#2206879]

My Maverick Speedball Seat Post (same as Crank Brothers Joplin) wasn't working too well so I decided to investigate. Wish I hadn't. High pressure suspension oil now all over the living room walls, ceiling, carpet, dog, well everywhere really except in the seat post. Oooops.

Any advice on getting said seatpost working again? And room cleaned....


 
Posted : 20/11/2010 2:51 pm
 fbk
Posts: 1
Free Member
 

🙂 Oops! 🙂

Nothing helpful to say really but that sounds like the sort of thing I'd do! Latest one was dropping the oil contents of my forks on some pretty new shoes - now one's a very different colour to the other 😳

Hope it turns out ok.


 
Posted : 20/11/2010 3:05 pm
Posts: 0
Free Member
 

drop maverick an email and they can supply the service details to get it working again (no changable parts with joplin as they are not the same)


 
Posted : 20/11/2010 3:08 pm
Posts: 0
Free Member
 

Room=Decorators

Seat post=AS ABOVE


 
Posted : 20/11/2010 3:08 pm
Posts: 0
Free Member
 

haha awesome my mate did this with a Joplin4 thinking he could strip it down completely.

2pure were great and repaired it all for him under warranty hopefully Maverick will help you the same.

As for your room, get cleaning, you may need some type of grease blocker to spray on the walls prior to painting to stop in "bleeding" through

Good luck getting it all sorted - fettling is great 😉


 
Posted : 20/11/2010 3:29 pm
Posts: 6321
Full Member
 

Unfortunately you'll have no joy with Maverick I suspect. I emailed them about mine a year or so ago, and the reply I got stated that as they had sold the design/license to Crank Bros it was down to them to fix it.


 
Posted : 20/11/2010 5:57 pm
Posts: 66118
Full Member
 

Burn the house down and claim it all on insurance, easiest option really


 
Posted : 20/11/2010 6:27 pm
Posts: 785
Full Member
 

This months MBR has a how to service guide for Crank Bros/ Joplin seatposts.


 
Posted : 20/11/2010 6:49 pm
Posts: 0
Free Member
 

Found this [url= http://vttplus.free.fr/img/joplin/Joplin_1.pdf ]Link[/url] a couple of weeks ago and might help. Not sure the 75psi is correct, I also found I needed to cycle the post a few times after putting the oil in to stop it feeling squidgy. Good luck!!!


 
Posted : 20/11/2010 8:10 pm
Posts: 3722
Free Member
 

Aye, check this months MBR as even though it's for a Joplin I'm sure there'll be major similarities.


 
Posted : 21/11/2010 2:39 pm
Posts: 0
Free Member
 

the link paultm is the one for a Joplin3 seemingly there are differences to a Joplin4, dont ask me what. But this is why mate did the same as you copying these instructions.

anymore than a greasing and it's time for 2pure or a bike tech


 
Posted : 21/11/2010 2:47 pm