On One Inbred 853 M...
 

[Closed] On One Inbred 853 Markings - Brant ?

Posts: 0
Free Member
Topic starter
 

Help me out here STW,

I have an On One inbred 853 which I am selling, now apart from a few slight differences in frame build, the only thing that gives the 853 status away is a sticker in the seat tube at the top just under the top tube so ----- Was the 853 sticker always in this position ?
I have seen another white Inbred 853 with the sticker at the bottom of the seat tube ?

** Calling Brant **

Is this likely ? or a replacement sticker thats in the wrong place ? or a con ?
Check this out : http://cgi.ebay.co.uk/on-one-inbred-18inch_W0QQitemZ330407101515QQcmdZViewItemQQptZUK_Bikes_GL?hash=item4cedcc444b

Seems someone has alresy picked him up on the dodgy forks business 😆
Thanks


 
Posted : 23/02/2010 12:13 pm
Posts: 19914
Free Member
 

The other dead giveaway for the 853s is a lack of gussets on the TT and DT at the headtube junction.

Is it frame only you're selling? If so, how much please?


 
Posted : 23/02/2010 12:32 pm
Posts: 19914
Free Member
 

That ebay one might be one of the very early original 853s, but it's not one of the more recent ones as the cables are on top of the top tube, not underneath it!


 
Posted : 23/02/2010 12:35 pm
Posts: 0
Free Member
 

the only thing that gives the 853 status away is a sticker

What about the sprinkling of fairy dust?


 
Posted : 23/02/2010 12:35 pm
Posts: 251
Full Member
 

were the original 853 inbreds all SS - I had one for a bit and I think the sticker was down the bottom of the seat tube.


 
Posted : 23/02/2010 12:37 pm
Posts: 19914
Free Member
 

And the 1/2lb lower weight? 🙂


 
Posted : 23/02/2010 12:38 pm
Posts: 0
Free Member
 

Gussets as PP said are the giveaway.

And the pixie dust.


 
Posted : 23/02/2010 12:38 pm
Posts: 0
Free Member
Topic starter
 

peterpoddy, 18" red 853 (no gussets, sticker top of seat tube, cable guides underneath - pucker one ! ), chain slap on driveside stay, paint removed and some scrapes in steel, few marks here and there, straight true though, looking for something around the £200 posted


 
Posted : 23/02/2010 12:50 pm
Posts: 7563
Free Member
 

come on on-one spotters you can do better!

that's got the old chainstays, top tube cable routing, which marks it as a 80/100mm one, and in DN6 at that.


 
Posted : 23/02/2010 12:54 pm
Posts: 0
Free Member
Topic starter
 

So the linky one is a con yar ?


 
Posted : 23/02/2010 1:03 pm
Posts: 0
Free Member
 

looking for something around the £200 posted

A bit much for a frame that needs framebuilder modifications to make sure it lasts longer than 6 months IMHO.


 
Posted : 23/02/2010 1:10 pm
 hora
Posts: 0
Free Member
 

Awww cracking dog 🙂


 
Posted : 23/02/2010 1:19 pm
Posts: 3012
Full Member
 

I saw that on-one last night and i was going to post up, as I thought it looked dodgy

Selling a bike to repair a fishing rod??


 
Posted : 23/02/2010 2:00 pm