Forum menu
Topic starter
Changed my cheapy free ball bearing race fsa to a sealed crane creak S3. Problem is the 2/3mm gap to steerer is now more than it should be 8mm? Causing top cut out of thomson stem to only just hold on. Know of a lower stack height normal 11/8th headset? £30 price roughly? No spacers used.
Posted : 03/07/2010 6:37 pm
FSA Orbit XL2 might be?
Posted : 03/07/2010 6:43 pm
Crank bros, not sure of the price though.
Posted : 03/07/2010 6:45 pm
crank bro's do the lowest stack around.. they are around £50-£90 but if you have a 1.5 head tube and run a 1/18 steerer, then you can go zero stack, cane creek do a couple of options and so do Hope
Posted : 03/07/2010 7:08 pm
Topic starter
It was an fsa orbit with the free bearings. So orbit 11 would make sense.
Posted : 03/07/2010 7:19 pm