Forum menu
Monarch rt3 deb, Ai...
 

[Closed] Monarch rt3 deb, Aircan removal

Posts: 0
Free Member
Topic starter
 
[#10752694]

Ok what am I doing wrong, I have one end clamped in a vice and the air can is just rotating and not coming off.

Don't have a strap wrench, is that the issue?


 
Posted : 05/08/2019 8:03 pm
Posts: 3603
Free Member
 

If it's the same as my plus, there's an o ring at the bottom of the air can(closest to the eye). Use a pick to get this off, then the air can just pulls off. With a bit of wiggling.


 
Posted : 05/08/2019 8:10 pm
Posts: 3508
Free Member
 

And dont forget to depressurise the shock first.


 
Posted : 05/08/2019 8:18 pm
Posts: 1048
Free Member
 

It is a pain, I really struggled with mine. I think the factory gets a bit excited and screws it too tight to take off by hand. I now own a strap wrench.

Even if you have pulled the outer off as above, you still need to unscrew the aircan proper.

Grip it at the bottom with the strap wrench.


 
Posted : 05/08/2019 11:14 pm
Posts: 0
Free Member
 

You are rotating the outer sleeve. You need to remove that first by sliding it off (first remove the O ring) and then the sleeve under that is the one you want to undo ๐Ÿ™‚


 
Posted : 05/08/2019 11:25 pm
Posts: 4477
Full Member
 

it took me 2 strap wrenches to get mine off!!!!


 
Posted : 06/08/2019 11:23 am