Forum menu
I've got Hope Tech 3 E4s on my bike, the hose on the rear calliper has been brushing against the spokes when the suspension compresses.
I loosened the banjo bolt to move the hose slightly, but now a bit worried that some fluid has escaped and I might die on the next ride.
Didn't touch the lever at all and only loosened the bolt slightly!
Do I need to carry out a re-bleed?
not the thread I feared it might be.
not the thread I feared it might be.
But you opened it anyway 🙂
If some fluid leaked out a bleed would be a good idea but you will probably only get a slightly mushy brake if you have a tiny bit of air. Being the rear I'd probably be too lazy to bother until it caused me grief, if it ever did
not the thread I feared it might be.
Sure?
If some fluid leaked out a bleed would be a good idea
If you muck about with it too much you're bound to get some fluid loss.
[i]But you opened it anyway[/i]
I try and do one thing every day that scares me.
I too opened this and read to the end, was actually looking for how to mend a chin-strap