Topic starter
Got a broken axle on a rear Hope xc so need to change the axle and the bearings are 4 years old so need doing as well.
Got the axle / drive side bearing out and am left with the non drive side bearing to shift, so how and which way does it come out?
Ta
Posted : 01/02/2009 4:30 pm
It comes out on the non-drive side - use a nice fitting socket & bar
Posted : 01/02/2009 4:34 pm
Topic starter
Sorry I am talking tosh - I have removed axle and NON DRIVE side bearing and am left with drive side to remove, so again how and which way (past the drive splines or through the hub shell)
Posted : 01/02/2009 4:41 pm
Past the splines - same method
Posted : 01/02/2009 4:46 pm
Topic starter
Ta, job done, big hammer and fingers crossed.
Posted : 01/02/2009 5:20 pm