Forum menu
feel like a change, they are old rims, XC Rear/AM Front pre tubeless, they cannot be run tubeless without building up the rim bed, frankly its a faff, and considering how easy tubeless is these days, i feel I'm missing out
i do have a ENVE M50 front wheel spare, but I'm not really fussed about buying a matching rear and using those - just feel like something different
i could split the wheels (they are on DT 240 CL hubs) but the rims only will have a terrible resale value probably,
i like centre lock (more so the freeza design rotor) would prefer an XD free hub so i can continue to run XX1 cassettes,
however the M9000 XC wheels appeal for some reason, not fussed about being locked into a hub design (they don't convert) as my frame is new and i don't envisage chasing it and 15mm front is fine, width on them doesn't really matter, i run 2.1 RaRa/Burts, 2.25 max - shimano free hub would be a compromise though
Crossmax SL Pro? bit old now?
use the M50 with a Light Bike rear rim
anything else out there without spending crazy money on MCFK/AX stuff
just carry on riding what i have and ignore the desire to buy something else?
If you want high end & an easy tubeless set up the how about [url= https://www.crankbrothers.com/wheelset_cobalt-11 ]THESE?[/url]
Not cheap mind 😯
except for 3 problems...
1. They're made by Crank Brothers
2. they're not really that light
3. they're made by Crank Brothers!!
Do you really want to go carbon again?
Reynolds black label? DT 240 hubs on them (XD and centre lock catered for) and nice stiff carbon rims. I took mine all over Andalusia for a week of rocky riding and they haven't missed a beat (XC version).
http://shop.upgradebikes.co.uk/Catalogue/Wheels/Reynolds/MOUNTAIN-WHEELS/BLACK-LABEL
Edit- the 2016 ones don't seem to have the XC option or the DT Swiss hubs (mine are 2015s)
If I were buying wheels I'd be looking at one of the DT Swiss spine sets, which can be got reduced from the germans.
If I were buying wheels I'd be looking at one of the DT Swiss spine sets, which can be got reduced from the germans.
The Spline wheels that I had on my Stanton which got stolen were really good; light, easy to service and set up tubless. The rims seemed pretty tough too.
I'd just go bling hubs on LB rims. Carbon-Ti appeal for something a bit less common. DT 180? Tune? Realise that DTs aside they're not Centrelock.
Roval Control SL? Nice rims and DT240 hubs. Probably not high end enough though!
DT swiss XRC or XMC 1200??
al Control SL? Nice rims and DT240 hubs. Probably not high end enough though
Build quality on my old (alu) Controle SLs was crap - nipples snapping and seizing, finish on spokes flaking off. Wouldn't rush to have another set.
Light bicycle on whatever hub's you fancy dt240 ?
For superduper light https://r2-bike.com/AX-LIGHTNESS-Laufradsatz-29-Premium-Plus-MTB-P-29T-E-Extralite-HyperFront-HyperRear2-1075g
For Super Light plus a bit less expensive https://r2-bike.com/Laufradsatz-29-Acros-Straightpull-Naben-Duke-Lucky-Jack-Carbon-Felgen-Sapim-CX-Ray-XC-MA
For even more on a budget sub 1000€
https://r2-bike.com/Laufradsatz-29-Extralite-Straightpull-Naben-DT-Swiss-Felgen-Sapim-CX-Ray-XC-MA
For killer price https://r2-bike.com/Laufradsatz-29-DT-Swiss-Naben-Ryde-Trace-Felgen-Sapim-CX-Ray-XC-MA
Nice those.
Bontrager's new Kovee XXX...?
New Mavic Carbon wheels?
Seen the Mavic trail carbon ones, they got some race XC on the way too?
I should have googled it really...
Coming in August.
Regarding a lot of the carbon options, it would be difficult to justify over LB rims
Kovvees look good but I wonder how the price will translate to the uk
And weight - Bontrager are often very optimistic!
These:
Cos tubs are frigging amazing. Total faff to glue tyres on, but they are awesome.
I sold some SRAM Rise tub wheels a couple of days before Dugast released them tubeless Ori things, I'd have probably still sold them anyway, I wouldn't want to puncture or have a tub issue in the peaks, be alright on a race day only bike I guess
The new DT Swiss wheels are very nice - we've just sold a set of the XMC 1200 which is the wider, AM version of these:
https://www.dtswiss.com/Wheels/MTB-Wheels/XRC-1200-Spline-29
XD driver, centrelock, tubeless, light, reliable...
No Tubes Valor... or if you want something a bit different, Bike Ahead BiTurbo RS.
suppose i should strip down and weigh what i have, then at least i have a baseline to work around as i of course dont want to add loads of weight
anyone know much about these? apart from the fact they made them light fat bike rims for Kuroshiro
https://r2-bike.com/ALCHEMIST-Felge-29-MTB-Clincher-Carbon-365g
anyone know the eBay seller here?
I don't, but he's only about 10 miles from me. Could potentially go and have a look.
cheers, not at all what I'm after really, i shouldn't work nights with access to eBay 😆
be nice though i guess,
Hmmm, I was sort of hoping you'd say yes. I'd buy them and then tell you they were shit.
He could've given the tubs more of a scrub.
What about Industry nine hubs and take your pick with the rim choice. Pretty sure all axles, colours and free hubs are catered for.
He's been trying to shift them for a while - overpriced in my opinion
right, stripped down what i have and the weights are as follows
front
ENVE Am on DT 240 CL Sapim CX-Ray - 850g
180mm Freeza Rotor - 131g
Lockring - 9g
Tube - 150g
2.1 Burt - 550g
rear
ENVE XC on DT 240 CL 10mm Sapim CX-Ray - 840g
DT QR - 69g
160mm Freeza Rotor - 115g
RT77 Lockring -9g
Tube - 160g
Burt 2.1 - 490g
the front ENVE M50 on Hope Pro 2 i have is 750g
currently thinging of a MCFK on Extralite Hyperfront maybe not much to go wrong with a front hub really, not sure what for the rear, ive had Tune before, i dont mind them,
i like the Freeza rotors, but i guess it limits my hub choice, however theres a cheap white DT 180 on eBay at the moment for the rear, but its a Shimano freehub, easily switched, but finding a matching front would be costly
whats lightweight and reliable in 6 bolt - Lauf is 180mm for the front, frame is 160mm minimum
XTR Carbon Rims
Tune King/Kong Hubs
Dugast Fast Bird 50s
courtesy of "dobbo" via eBay
for now anyway, I've got a set of white RS-1s & some Carbon-Ti hubs waiting for another day, just not getting a lot of time to ride lately
[URL= http://i1272.photobucket.com/albums/y394/dansipods2/IMG_6641_zpsdswwscxm.jp g" target="_blank">
http://i1272.photobucket.com/albums/y394/dansipods2/IMG_6641_zpsdswwscxm.jp g"/> [/IMG][/URL]
[URL= http://i1272.photobucket.com/albums/y394/dansipods2/IMG_6634_zpszmoaxdff.jp g" target="_blank">
http://i1272.photobucket.com/albums/y394/dansipods2/IMG_6634_zpszmoaxdff.jp g"/> [/IMG][/URL]
Nice work dirtynappyrider 🙂