[Closed] Fox bushes for VAN R - which part and where from?

TF Tuned, Mojo, Loco Supsension, J-Tech or any suspension specialist will be able to supply your a bushing

The size you'll need is 12.7 mm (1/2") for any fox shock.

As for local bearing supplier, try the yellow pages....and ask for a 12.7 mm (1/2") bushing!

Might be DU10 (someone said?!)

IIRC It's 12.7mm DU Hula Hoop bushing... here have some homework, read these:

http://singletrackworld.com/forum/topic/re-using-shock-busheswill-they-ware-out-quickly

http://singletrackworld.com/forum/topic/shock-bushings-explain-sizing

http://singletrackworld.com/forum/topic/where-do-you-buy-your-shock-bushings

http://singletrackworld.com/forum/topic/du-bushings-what-do-you-reckon

http://singletrackworld.com/forum/topic/need-new-shock-bushes-any-alternatives-to-the-rwc-needle-bearing-kits

http://singletrackworld.com/forum/topic/12mm-du-bushings-where-from

http://singletrackworld.com/forum/topic/betd-hula-hoop-bushes-fox-12-multibuy

http://singletrackworld.com/forum/topic/were-to-get-shock-bushings-from

sweet, thanks!

PS, have read the links, and got the answer, just repeating here for anyone else:

You're right ... "its a 1/2in DU bush if its a fox, manitou and rockshox are different metric sizes" 1/2 in = 12.7mm

Also, BETD, TF tuned or 'local bearing supplier' (whatever _that_ is)!

You can get the right tool for removing the old ones off ebay for 8 quid.

or use a couple of socket, though the tool is much easier to use.

Sorry had to pop out, hense the hurried links...

as for the local bearing suppliers... try [url= http://www.google.co.uk/#sclient=psy-ab&hl=en&source=hp&q=bearing+supplier+stourbridge&pbx=1&oq=bearing+supplier+stourbridge&aq=f&aqi=&aql=1&gs_sm=e&gs_upl=7681l12163l1l12669l12l11l0l0l0l0l271l2378l0.3.8l11l0&bav=on.2,or.r_gc.r_pw.,cf.osb&fp=b7e5bb913cb3de15&biw=1280&bih=814 ]this[/url] but replace "stourbridge" for your local town..