Fox 36rc2 setup tip...
 

[Closed] Fox 36rc2 setup tips

Posts: 0
Free Member
Topic starter
 

Just moved to these from pikes, I have set them up with 25% sag, 2 volume spacers, 4 clicks of LC, 10 clicks of HSC, rebound 3 from closed, I am getting through all the travel maybe a bit easy but my main issue is aching forearms/hands on any descent over a couple of minutes. Tried dropping more compression off but seem to dive through more. They feel nice and stable but I never had the ache issue with pikes. Any suggestions.


 
Posted : 19/04/2016 5:57 pm
Posts: 0
Free Member
 

Counter the dive with the low speed, but I'd be looking at backing the high speed off to zero and starting again


 
Posted : 19/04/2016 6:28 pm
Posts: 728
Free Member
 

I set mine up great, by selling them and buying Lyriks ๐Ÿ™‚


 
Posted : 19/04/2016 6:37 pm
Posts: 0
Free Member
 

As above

Rebound sounds a little slow as well, could they be packing down on successive hits?


 
Posted : 19/04/2016 6:38 pm
Posts: 0
Free Member
Topic starter
 

Set the rebound on the fox guide not noticed much dive but will speed it up a bit, so adding LC does not make them harsh ?


 
Posted : 19/04/2016 6:55 pm
Posts: 0
Free Member
 

It will eventually, but you want to setup the LSC to kill off things like brake-dive. HSC will definitely make it feel harsh, i used to run 0 clicks on mine!


 
Posted : 19/04/2016 7:00 pm
Posts: 0
Free Member
Topic starter
 

Fair enough I will give it a go


 
Posted : 19/04/2016 7:15 pm