Forum search & shortcuts

Easy DIY mudguards.
 

[Closed] Easy DIY mudguards.

Posts: 0
Free Member
Topic starter
 
[#4860180]

I read lots on all types of mudguards and it ranged from cheapie a that broke easily to expensive ones that lasted longer but still wernt all that great.
So I decided to make my own with some bits I had lying in the garage for years.
Very effective and won't shatter if I flick a big stone or similar up at it.

[IMG] [/IMG]
[IMG] [/IMG]
[IMG] [/IMG]


 
Posted : 11/02/2013 4:16 pm
Posts: 46183
Full Member
 

teeeeeeej!


 
Posted : 11/02/2013 4:20 pm
Posts: 0
Free Member
Topic starter
 

?


 
Posted : 11/02/2013 4:30 pm
Posts: 46183
Full Member
 

http://singletrackworld.com/forum/profile/tandemjeremy

You have a predecessor who made homemade mudguards:
[url= http://farm8.staticflickr.com/7017/6688913045_a3c66eab4c_b.jp g" target="_blank">http://farm8.staticflickr.com/7017/6688913045_a3c66eab4c_b.jp g"/> [/img][/url]
[url= http://www.flickr.com/photos/25846484@N04/6688913045/ ]commuter[/url] by [url= http://www.flickr.com/people/25846484@N04/ ]TandemJeremy[/url], on Flickr


 
Posted : 11/02/2013 4:34 pm
Posts: 0
Free Member
Topic starter
 

Yes I'm sure there have been many over the long years.


 
Posted : 11/02/2013 4:36 pm
 LoCo
Posts: 0
Free Member
 

Best one I've seen is a full length of guttering from headtube to bb complete with sharp edges 😯


 
Posted : 11/02/2013 4:37 pm
Posts: 0
Free Member
Topic starter
 

Wanted to keep the front as small but effective as possible.


 
Posted : 11/02/2013 4:44 pm
Posts: 0
Free Member
 

What's the second photo of?


 
Posted : 11/02/2013 4:45 pm
Posts: 0
Free Member
Topic starter
 

Is it a bird? Is it a plane? NO it's a rear mudguard.


 
Posted : 11/02/2013 4:51 pm
Posts: 0
Free Member
 

Nice...think I'll stick to my crud catcher though 8)


 
Posted : 11/02/2013 4:54 pm
Posts: 0
Free Member
 

Chief after gently brushing his calf against his mudguard whilst dismounting...

[img] [/img]


 
Posted : 11/02/2013 4:55 pm
Posts: 0
Free Member
Topic starter
 

"Chief after gently brushing his calf against his mudguard whilst dismounting...
"
I DON'T THINK SO. NICE TRY THO. 🙄


 
Posted : 11/02/2013 5:09 pm
Posts: 0
Free Member
 

I saw a guy in CyB at christmas who made mudguards out of an old tyre.


 
Posted : 11/02/2013 5:18 pm
Posts: 0
Free Member
Topic starter
 

It don't matter what their made from as long as they do the job.
Even better when it's free too.


 
Posted : 11/02/2013 5:23 pm
Posts: 0
Free Member
 

Is it a bird? Is it a plane? NO it's a rear mudguard.

You've put a rear mudguard two foot above the height of the rear wheel? How effective are you finding that?


 
Posted : 11/02/2013 5:27 pm
Posts: 0
Free Member
 

Seriously though, what are they made of? Looks like ally sheet or something?

I have the Crud ones that have soft rubberised edges so they don't slash me to bits in a crash.


 
Posted : 11/02/2013 5:28 pm
Posts: 8177
Free Member
 

Look good, though as hinted at above there are some sharp looking edges on that front guard that I wouldn't fancy catching.


 
Posted : 11/02/2013 5:28 pm
Posts: 251
Full Member
 

I've never seen cables so long they have to be run under the downtube before they can go up to the cable guides.


 
Posted : 11/02/2013 5:30 pm
Posts: 0
Free Member
Topic starter
 

Does it matter where I run the cables on my own bike then?
They are made from guttering so there won't be any slashed legs as they bend.
I would have thought that if you fall from your bike on the trail the last of MY worries would be my mudguards hitting me
It would be all the stones rocks and branches and what ever else maybe on the floor your about to hit.
Still as the old proverb says "IF YOU AIN'T GOT NOTHING SENSIBLE TO SAY! SAY SOMETHING STUPID"
😆


 
Posted : 11/02/2013 5:45 pm
Posts: 0
Free Member
 

How bout some rev flappers from cornflake boxes pegged to the seatstays?
Mega chavtastic!


 
Posted : 11/02/2013 5:48 pm
Posts: 23341
Free Member
 

surely it;s easy to log onto CRC and buy some that work and don't look shit.


 
Posted : 11/02/2013 5:51 pm
Posts: 8177
Free Member
 

Touchy much OP?

Still as the old proverb says "IF YOU AIN'T GOT NOTHING SENSIBLE TO SAY! SAY SOMETHING STUPID"

I prefer this one:

Pride comes before a fall

😀


 
Posted : 11/02/2013 5:51 pm
Posts: 0
Free Member
 

I remember a while back on some superscrimpers type programme (maybe superscrimpers) there was some guy with a tasty full carbon Specialized FS bike and he was really chuffed about having made a front guard from a bit of drainpipe cut in half.

Looked utter gash.

I mean I'm all for bodging and I have a chopped up milk carton cable tied to the fork on my hardtail, mucky nutz style and it does the job. But there are limits!


 
Posted : 11/02/2013 5:54 pm
Posts: 0
Free Member
Topic starter
 

So you saying they look shit then jam bo?


 
Posted : 11/02/2013 5:57 pm
Posts: 0
Free Member
Topic starter
 

Milk carton? Did that looked ****ing rubbish. I'd rather be wet and splattered in dirt.


 
Posted : 11/02/2013 5:57 pm
Posts: 23341
Free Member
 

So you saying they look shit then jam bo?

yes.


 
Posted : 11/02/2013 5:59 pm
Posts: 0
Free Member
Topic starter
 

Question. So. Does it matter where you position a mudguard as long as its effective.
Answer. NO.


 
Posted : 11/02/2013 5:59 pm
Posts: 251
Full Member
 

[i]So you saying they look shit then jam bo? [/i]

you'll struggle to find people who say that rear one looks good 😉


 
Posted : 11/02/2013 6:00 pm
Posts: 0
Free Member
Topic starter
 

Looks good vs does what it's supposed to do. Yeah right.


 
Posted : 11/02/2013 6:02 pm
Posts: 251
Full Member
 

thing is, it's not binary is it?

Most people want 'Looks good [i]and[/i] does what it's supposed to' - there are any number of relatively inexpensive things availabel that look better and work better than what you have.

Most of us also choose not to ride round on a bike with the sweepings from the garage floor zip tied to it.


 
Posted : 11/02/2013 6:06 pm
Posts: 251
Full Member
 

man comes on forum inviting comments on home made mud guards.

people say 'they're not that attractive and look like the sharp edges would hurt in a crash'.

man takes umbrage

*sighs*


 
Posted : 11/02/2013 6:13 pm
Posts: 0
Free Member
Topic starter
 

Man comes on site saying he's made some cheaply quickly made no cost mud protection and gets pisstakers.
FACT.


 
Posted : 11/02/2013 6:18 pm
Posts: 0
Free Member
 

They look S**t, the front one will cut your leg if you crash, and the rear one will be as good as useless at catching mud, but if it makes you happy....


 
Posted : 11/02/2013 6:29 pm
Posts: 46183
Full Member
 

Mind your language and abuse.


 
Posted : 11/02/2013 6:39 pm
Posts: 5063
Full Member
 

Crikey


 
Posted : 11/02/2013 7:52 pm
Posts: 0
Free Member
 

Oooooooh this one is good.

Op great to post on an open forum, but bear in mind you will get varied responses. Take them as they come. You posted them up. If you didnt want people to say anything you shouldnt have posted it.
Personally I think they look awful and would not consider making them and putting them on mine but if they work for you fair play. 😀


 
Posted : 11/02/2013 8:35 pm
Posts: 23635
Full Member
 

For most people this cycling thing [i]is [/i]a fashion parade, thats why people on this forum are forever posting pictures of their bikes. Cycling is a fashion business so what a mudguard looks like its doing is more important than what it actually is doing - to most people.

In purely practical terms the front guard is wider than it needs to be and the rear one could be a third of the length you've got there and do the same job - any muck that would hit the rear two thirds of the guard would miss you.


 
Posted : 11/02/2013 9:09 pm
Posts: 0
Free Member
 

Man comes on site saying he's made some cheaply quickly made no cost mud protection and gets pisstakers.
FACT.

are you Rafa Benitez? 😆


 
Posted : 12/02/2013 10:08 am
Posts: 8469
Full Member
 

Mucho bitchiness here!!

Personally, I think the front one looks good - if it works, result!!

That rear one though, lower would be more effective, and it certainly isn't pretty!


 
Posted : 12/02/2013 10:54 am
Posts: 9238
Free Member
 

Surely you bang your knees/legs onto that front one constantly


 
Posted : 12/02/2013 11:02 am
Posts: 0
Free Member
 

Surely you [s]bang[/s] slash your knees/legs to ribbons on that front one constantly

I hate "fixed it for you" posts, but what the hell, I fixed it for you...


 
Posted : 12/02/2013 11:06 am
Posts: 0
Free Member
 grum
Posts: 4531
Free Member
 

Fender Benders are only a fiver. What hourly rate do you earn? Bet it took at least a fiver's worth of your time to make and fit those monstrosities. 😛


 
Posted : 12/02/2013 1:13 pm
Posts: 6480
Free Member
 

OP- Your gear cables aren't on right.

I dont like your mudguards either and your walls are a disgrace.


 
Posted : 12/02/2013 1:21 pm
Posts: 2131
Full Member
 

You could have someone's eye out with that


 
Posted : 12/02/2013 1:29 pm
Page 1 / 2