Topic starter
Hi
I've got a Cannondale with a headshok. I'm considering removing the headshok to allow the fitting of a normal fork, how difficult is this to do? Also how easy is it to refit the headshok?
Cheers
Posted : 08/10/2010 10:39 am
It's relatively straight forward.
Email in profile if you wan to get in to details. Might be a dealyed response as I am flying to Singapore later.
Posted : 08/10/2010 11:58 am
Topic starter
YGM Pete - Thanks
Posted : 08/10/2010 12:10 pm
Its easy to do, same as knocking out a normal set of headset cups. I take it you have a headshok to 1 1/8" reducer? I used the marzocci ones CRC sell and they were fine.
Posted : 08/10/2010 12:30 pm
Take off the top cap and stem then whack the top with a wooden mallet and the fork slides out. Putting it back uses the same principle.
Posted : 08/10/2010 12:34 pm
