Hey guys.
Headset on my 2011 Cannondale SL1 is on it's way out and I would like to replace it with something good.
Took it into the LBS (who don't deal with Cannondale) and they were a little stumped as to what alternatives I have. They mentioned something about it being semi-integrated or something, I;m not really sure.
This is the bike - http://www.evanscycles.com/products/cannondale/trail-sl-1-2011-mountain-bike-ec025258
Any ideas what I could replace it with?
Thanks in advance.
you can either find a replacement cane creek one for it, or it will, with a bit of looking fit a normal 1.5" headset (it is the internal dia of a headshok bearing that's 1.56"), though you will need t make sure the steerer has enough in it as the stack height on a 1.5 will be bigger.
Thing is with cannondale headtubes, their reamed for cannondale headsets, or a headset with a short insertion depth. Some 1.5" headsets are quite deep as they're designed with DH in mind.
have a browse on chainreaction there should be a few on there
Have a look here and see if anything suits
http://qwertycycles.co.uk/collections/headsets
Yes this is the one for the Trail SL range of Cannondales.
http://qwertycycles.co.uk/products/cannondale-trail-semi-intergrated-headset-1-5-kp191
Got them in stock too.
Aye, that's the same one. Was ideally looking for an 'upgrade' as such and wondered if I had options.
Thanks for that though, means if nothing else, I can replace it. Thanks.