Brake olives - plum...
 

[Closed] Brake olives - plumbers' merchants?!

Posts: 426
Free Member
Topic starter
 

Just asked at the LBS whether they stock olives for brakes. They don't but they suggested I try a plumbers' merchants. ๐Ÿ˜ฏ

Now, I was a bit taken aback, but maybe this is sensible advice - anyone ever bought any olives from such a source?

NB, maybe it's just Hope brakes, when I confirmed it was for Shimano I was pointed toward Madison.

CRC, here I come...


 
Posted : 22/10/2012 11:59 am
Posts: 1799
Free Member
 

No, don't think plumbers merchants will have olives that small


 
Posted : 22/10/2012 12:40 pm
Posts: 0
 

Sounds like your LBS assistant moonlights at emergency plumbing.

Shimano needs a T-shaped insert as well as the olive.
I know you can re-use these if you can get it out, but the olives are sold with a new one.
I have not tried fitting a Magura olive (does not use a T-piece) on a Shimano hose, but since they use the same size hose, mineral oil and connector nut it does look viable.
Comments?
Warning of sudden death?

PaulD


 
Posted : 22/10/2012 12:45 pm
Posts: 2053
Free Member
 

I think plumbers merchants will prob only go down to 9mm ish.

I'm sure 5mm are used in compressed air applications though. Maybe a local supplier for compressed air equipment is worth a try?


 
Posted : 22/10/2012 12:48 pm
Posts: 0
Free Member
 

different lbs me thinks...most i know stock em...


 
Posted : 22/10/2012 12:58 pm