Forum menu
Topic starter
I'm moving from a 73mm BB shell to a 68mm BB shell frame, with the above cranks.
Is it just a case of putting some spacers on the drive side behind the cups as per shimano, hope etc...
Posted : 17/07/2011 3:27 pm
never heard of spacers being used?
Posted : 17/07/2011 3:31 pm
All road frames should be 68mm width if english threaded...??
Posted : 17/07/2011 3:35 pm
+1 road bbs aren't 73mm unless you're fitting ut cranks to an mtb.
Posted : 17/07/2011 3:57 pm
Topic starter
Cheers all
Yes, it was a case of tape measure fail, on the plus side at least the cranks fit the new frame..!
Posted : 17/07/2011 4:08 pm