160mm cranks - shimano 12sp chain compatible

pembo6

Posts: 420

Free Member

Topic starter

[#13522251]

I'm chasing options for 160mm cranksets that will work with chains that are compitable with Shimano 12sp chains? Is there anything available other than the new RaceFace turbines? As far as I can tell, everything else seems to be all SRAM/KMC chain compatible, not Shimano 12sp.

🙁

Posted : 31/01/2025 4:04 am

BearBack

Posts: 3226

Free Member

Samox make many lengths and use the sram chainring interface Plenty of after market rings with 12spd shimano compatibility (e.g. NSB, oneup switch, wolftooth etc.) some will also have different offset options

Posted : 31/01/2025 5:47 am

Blake, nixie, nixie and 1 people reacted

pembo6

Posts: 420

Free Member

Topic starter

Cheers. I'll take a look at those options.

Posted : 31/01/2025 7:46 am

nixie

Posts: 8255

Full Member

Hope and rotor do at the premium end, just get a chainring that's 12s Shimano compatible. Lots of companies used SRAMs 3 bolt design for chainring attachment. Anything in the correct length that uses that could be used as there are 3 bolt SRAM for chainrings available that are Shimano 12s compatible.

Posted : 31/01/2025 8:29 am

ogden

Posts: 1796

Free Member

Unite components do 155-175 length cranks. They've switched back to anodizing from cerakote as well now which was the main problem people were having with Unite.

Posted : 31/01/2025 8:32 am

alan1977

Posts: 1895

Free Member

raceface era's, hope's....there's usually a 3rd party chainring that works, I'm running a 165mm x01 with a DMR chainring on an XT drivetrain.

Posted : 31/01/2025 8:54 am