Hi what size of tape do i need for my hope enduro 23mm internal width rims do i need 25mm or 27mm

I’d say 25mm. And I’d recommend 25mm wide gorilla tape from B&Q. Amazing stuff, sticks so much easier than Stans and far cheaper – £2.97 for enough to do about 5 rims.

I did mine with 25mm Stan’s. Was a bugger to use and I wish I’d have got the Gorilla Tape.

Just got tubeless valves, didn’t use a rim strip.

great will try the gorilla tape looks thicker than the stans tape

I did mine with 25mm gorilla tape. Easy to apply just take your time and make sure there are no bubbles and the tape is centered. I used Stans valves though, because from experience they’ve been faultless.

Cheers guys I always put 2 layers on tape on before is it the same with gorilla tape

Up to you really, but I only needed one layer of the gorilla tape overlapped by about 3″ across the valve hole.

Cheers guys appreciated