Viewing 12 posts - 1 through 12 (of 12 total)
  • race face cinch crankset question??
  • ton
    Full Member

    will one of these enable me to run a 22/32 4 bolt combo?

    http://www.chainreactioncycles.com/race-face-cinch-direct-mount-crankset-spider/rp-prod113259

    or should I just buy a shimano complete unit

    ton
    Full Member

    come on people
    please dont fail me.

    transporter13
    Free Member

    Yes.. That will do want you want as long as you have next sl cranks

    sillyoldman
    Full Member

    Yes, but Shimano cranks will end up being a similar cost if you don’t have the rings, and are better cranks anyway.
    RF are specced on bikes as they’re cheaper than Shimano, not because they’re better.
    With the cinch adaptor, you have multiple interfaces that could work loose/creak, and you lose the sole selling point of Cinch – the cleaner look of a DM single ring.

    sillyoldman
    Full Member

    I’d sell the Next SLs before they fail and put on some HTII cranks.

    ton
    Full Member

    shimano ordered then

    cheers all

    Mintyjim
    Full Member

    If it’s not too late I’m happy to send you the spider and rings that come with my race face aeffect cranks. Unused cos I went single ring immediately.
    They were on my YT jeffsy al2.

    ton
    Full Member

    mintyjom, what size rings?

    Mintyjim
    Full Member

    24 / 36 according to their website..bit bigger than you want I know.

    ton
    Full Member

    gone for a shimano one noe, thanks for the offer.

    DezB
    Free Member

    Thank link is the same spider that was on my Turbines when 2x
    Shimano is the sensible option though.

    Mintyjim
    Full Member

    No problem.

Viewing 12 posts - 1 through 12 (of 12 total)

The topic ‘race face cinch crankset question??’ is closed to new replies.