Looking at the burgtec Ti bushings. Is it 1degree per end? Or 0.5 degree?

I only need a lower one.

Linky

Looks like it’s 1 deg for 8mm bolts & 1.5 deg for 6mm, so yeah .5 deg per end for 8mm I guess?

My Orange Alpine worked out at -1 for the pair. It will vary depending on the size of the bolts and the length of the shock/stroke.

6mm bolts so ~0.75 per end then I guess.

It depends on a load of variables- total travel has to come into it too, and linkage design. So they’ll take their best guess basically.

TBH if it’s worth doing, it’s worth doing twice.

went for a straight one in the end, realised it would drop my BB as well, and a bandit really doesn’t need that…