Viewing 13 posts - 1 through 13 (of 13 total)
  • Best 1×10 expander/NW set up?
  • tang
    Free Member

    Have run 1×10/1×9 without expander before pre NW/clutch days. Got a new frame on its way and I’m drawn to 1x again. What is the best combo out there in terms of shift issues/durability(thinking NW ring) One up & cage, Wolftooth, hope something else?

    g5604
    Free Member

    One up expander + rad cage is pretty solid, using with a zee mech.

    Conan257
    Free Member

    Mine runs nice.

    Absolute Black Chainring, Hope T-Rex expander, SRAM X0 cassette, SRAM X9 mech

    shredder
    Free Member

    Blackspire chainring
    One up expander
    XT cass
    One up 16t
    One up Rad cage

    Works brilliantly with crisp shifting.

    simonhuscroft
    Free Member

    Black spire monoveloce ring
    Xt cassette
    Hope expander
    Slx med clutch with rad cage

    Shifts flawlessly and no dropped chains but does drop down 2 from the 40t when back pedalling, although not caused an issue when out and about.

    honourablegeorge
    Full Member

    Common theme here, but the Rad cage is a great little product and really worth the extra, smooths it all out. After that, the expanders and NW rings are all much of a muchness – I think OneUp do a package deal though, which might be the way to go.

    Sui
    Free Member

    Middleburn 34tooth Hardcoat N/W
    Shimano 11:36 cassette
    OneUp 42Tooth expander
    XT long cage clutch mech
    Saint Shifter

    I’ve never had any issues shifting, so can’t say if the RAD Cage makes much of a difference, maybe different bikes are more susceptible to the stretch on the mech..?!?

    tang
    Free Member

    cheers guys. Anyone used both one up cages?

    kiwijohn
    Full Member

    Absolute Black 32 Spiderless for SRAM cranks.
    One Up 42 + 16 in Hulk smash green.
    SRAM X9 type 2.1 mid.
    It wasn’t too flash getting off the 42 with my old, worn, non-clutch X9, but a new one helped a lot. Even wound the B screw 1/4 of the way back out.
    Also shaved 1/2 a kilo by ditching the front derailleur & chain guide.

    mikewsmith
    Free Member

    Hope T-rex 40t retainer ring and a standard X9 mech, no issues didn’t even need the longer b tension screw.

    somouk
    Free Member

    I’m running a hope NW and Hope extender with a SRAM clutch mech and it’s been excellent so far.

    The extra cog in the cassette is needed as there is a big jump lower down the range.

    steve_b77
    Free Member

    I’ve got this set up:

    On-one ringmaster 32t
    XT cassette
    One Up 40t with 16t to replace 15 & 17
    One Up RADr cage on a Deore clutch mech
    KMC X10L chain

    Been faultless through all sorts of crap riding conditions and some dry ones too

    stevied
    Free Member

    AB Oval 32T chainring
    Superstar 40T Expander
    Zee FR mech + RADr cage
    XT cassette with 16T to replace 15 & 17T (used a 9sp from SJS without issue)
    Bionicon C-Guide

    Not dropped a chain since I went 1 x 10.

Viewing 13 posts - 1 through 13 (of 13 total)

The topic ‘Best 1×10 expander/NW set up?’ is closed to new replies.