Forum Replies Created

Viewing 40 posts - 1 through 40 (of 279 total)
  • Greg Minnaar: Retirement 20 Questions with the GOAT
  • bighendo
    Free Member

    RIP my mate Troutie

    bighendo
    Free Member

    bighendo
    Free Member

    ahhahahaha! 😀 Still alive and kickin with all my teeth
    … “now 29er” is still running superb, I don`t need a new frame, cheers anyway!
    only component change is a 222mm DHX Air shock

    bighendo
    Free Member

    … long travel 29ers?? yep, loads of fun!! 😀 😀

    bighendo
    Free Member

    Kudos wobbem! i like it!!

    .. and, here`s my 29er Heckler,
    I posted it on the Santa Cruz forum over on MTBR…

    Heckler 26,… now 29er! 🙂

    ………see what you make of their comments!! lol 🙂

    bighendo
    Free Member

    valve/tape interface is the weakest link
    how old is the installation?

    … for 100% reliability, re tape it

    bighendo
    Free Member

    Dalby map

    if your doing the red route,
    then start/finish at the visitors centre!!

    bighendo
    Free Member

    extremely cheap
    100% effective
    easy to rinse off
    … caustic soda, (Sodium Hydroxide)
    it turns gunky grease and oil… into soap!

    bighendo
    Free Member

    … now your off tubeless can i recommend that you get some proper UST tyres and save yourself some grief regarding sealing with Stans etc
    i fitted a pair of Maxxis Ardent UST tyres well over a month ago with the intention of injecting the stans fluid in the very next morning
    … i still havnt got round to it and theyre still hard despite riding over a couple of hundred off road miles! 🙂

    bighendo
    Free Member

    Flows are not UST rims
    100% reliability is your best friend

    bighendo
    Free Member

    join the club sheeps, mine went too,
    2 plastic driveside spacers doesn`t leave much thread on Hope BB,
    i salvaged mine with an Isis BB ….
    http://singletrackworld.com/forum/topic/bb-issue-bb-spins-in-frame

    bighendo
    Free Member

    nothing constructive to add sorry!,
    …. mingin!! :/

    bighendo
    Free Member

    1/… runtime = yes
    2/ performance = no, since they would be the same voltage
    3/ … http://www.mtbbatteries.co.uk[/url%5D

    bighendo
    Free Member

    agreed they size up smallish, but i love my prophet, the Prophet sl has a 190mm shock for even slacker angles, had mine down to 22-23lb , some nice variations on MTBR, …
    MTBR, post your prophet

    bighendo
    Free Member

    great!, i would like to do this too

    bighendo
    Free Member

    tooltray?? Junk!!

    bighendo
    Free Member

    🙄

    bighendo
    Free Member

    i say there are better/cheaper alternatives,
    even on a very clean very smooth surface it lacks grip …
    eg, Silicone Sealant adheres 100x better and is loads cheaper

    bighendo
    Free Member

    there is an easy to find entrance on the A159,
    said entrance is directly opposite a company that makes sheds,
    map in link……
    Link to A.B.Creasy[/url]
    park up there, or drive on through to the opposite side (car park),

    bighendo
    Free Member

    yeh its up the road from me, its just flat though
    ok for an hour or 2
    just lately we`ve been to LadyBower area

    bighendo
    Free Member

    see, i built my Heckler up Donkeys years ago
    ride it week in week out, summer.. winter ..rain ..shine
    never changed the headset yet!
    or even had to adjust it
    …C-H-R-I-S K-I-N-G

    bighendo
    Free Member

    the wheels, are FAR too small diameter!

    bighendo
    Free Member

    brakes are meant to be brakes, … not ornaments!
    XTR, best brakes EVER!

    bighendo
    Free Member

    same here in not so sunny scunthorpe
    happens every year though..
    wreaks havoc with my petunias!! 😥

    bighendo
    Free Member

    plastic insulated mugs rock
    keep your brew hot and never smash!!
    …Aladdin 350ml

    bighendo
    Free Member

    [/quote]sandal100.. Where did you get the lower bearings from?
    Are they the metal seal version

    Bearings with a metal shield are not sealed they are shielded
    Bearings with a rubber seal are sealed

    bighendo
    Free Member

    INFO HERE

    INFO HERE[/url]

    Didn’t need any tape in on my Mavic UST rims,
    UST ready rims don`t have valve spoke holes.

    FTFY

    bighendo
    Free Member

    Keep your backpack as light as possible!!

    bighendo
    Free Member

    You`ve just reminded me why i prefer to cycle
    … on my own!

    bighendo
    Free Member

    i feel your pain…
    Isis for me, i`ve had it with X Type too!

    bighendo
    Free Member

    ………………Give em a ring!!!
    Dalby Bike Barn is owned and operated by Pace Cycles Limited in partnership with CTC and the Forestry Commission. For further details please visit our website; http://www.dalbybikebarn.co.uk

    Or call us on 01751-460049. We’re open from 9am through to 5.50pm

    bighendo
    Free Member

    Maxxis Ignitor …easy peasy,
    always put the tyre on opposite the valve first
    tubed or tubeless!!

    bighendo
    Free Member

    5`7″, large Heckler, 160 talas, 70mm stem, and a layback ..
    i hate being perched right over the pedals!

    bighendo
    Free Member

    very impressed with the quality of my JRA wheelset build!!

    bighendo
    Free Member

    Jeez!! how many pictures do you plan to take??
    SD cards are cheap as chips now
    16Gb, 32Gb …..
    ….. and no fannying about in cafes!! 😀

    bighendo
    Free Member

    SKF stainless, sadly they are no longer in production

    bighendo
    Free Member

    got me some superstar organic to replace the two bits of wood
    that come as standard with hope brakes,
    waaaay better!

Viewing 40 posts - 1 through 40 (of 279 total)