Forum menu
Illuminating the bo...
 

[Closed] Illuminating the boot of the car...

Posts: 3266
Free Member
Topic starter
 
[#7509389]

Not a euphemism.

I have a 2013 Doblo. The boot has one tiny (5w?) courtesy light about 6" up on the left hand side. It is a poor illuminator.

I need to add some additional lighting as the boot is a massive dark cave when loading/unloading. I'm thinking LED. I'm thinking Warm White as I don't want flashbacks to an operating theatre. I'm happy to wire in via a relay and a 30A feed I have run to the rear quarter for the towbar.

Does anyone have any suggestions as to a suitable LED unit? I could use 5050 SMD off the roll, but I'm unsure how much I'd need.

Has anyone got any recommendations or advice?

Thanks,
TroutWrestler.


 
Posted : 10/12/2015 9:16 pm
Posts: 43955
Full Member
 

Try replacing the existing bulb with an LED first. I did that for the rear lights in my Trafic and it made a huge difference.


 
Posted : 10/12/2015 9:17 pm
Posts: 0
Free Member
 

Would it be worth trying the LED equivalent of the bulb first, before looking for a custom solution? I think there are some very cheap ones on eBay.
Edit: beaten by scotroutes.


 
Posted : 10/12/2015 9:19 pm
Posts: 17843
Full Member
 

How about a couple of those multi-led round torch things that you get in places like B&Q. Yeah, they take batteries, but they'll last for ages and you can Velcro them into the boot and just whack them on when you open the boot...

Not as convenient as something wired into the car, but simple and cheap.


 
Posted : 10/12/2015 9:23 pm
Posts: 3266
Free Member
Topic starter
 

A major issue is the low location of the current light. Also the seatbelt for the 3rd row of seats hangs RIGHT across it. The interior is specific to the 7 seater, and the designer must have been wanting to get finished without thinking things through. Additional lighting is definitely required.


 
Posted : 10/12/2015 9:39 pm
Posts: 0
Free Member
 

Take a feed from the light to a relay and fit a bigger more powerfull light into the roof. Or as someone sugested some velro and leds.


 
Posted : 10/12/2015 10:05 pm
Posts: 66109
Full Member
 

I stuck some random aux light I got off ebay on the tailgate and wired it into the feed for the original interior light. I'm probably pulling more amps through it than it likes but it's not set me on fire yet and it's massively useful.

If I was going to do it again though I'd be tempted to just get a cheap bike light and sticky back tape it to the tailgate ๐Ÿ˜†


 
Posted : 10/12/2015 10:10 pm
Posts: 0
Free Member
 

I added a 30cm LED strip ([url= http://www.ebay.co.uk/itm/White-30CM-1Ft-12-12-LED-5050-LED-Flexible-Strip-Light-Waterproof-DRL-12V-M002-/310982051772?hash=item4867f987bc:g:50EAAOxyqjBTlqsn ]Like this[/url]) just spliced straight into the wiring for the existing interior light pretty successfully. This is the before and after:

[URL= http://i851.photobucket.com/albums/ab75/crashbanggg/Capture_zpsnyus88nc.jp g" target="_blank">http://i851.photobucket.com/albums/ab75/crashbanggg/Capture_zpsnyus88nc.jp g"/> [/IMG][/URL]


 
Posted : 10/12/2015 10:24 pm
Posts: 1712
Free Member
 

1:10 in ...


 
Posted : 10/12/2015 10:26 pm
Posts: 15555
Free Member
 

You can get stand alone battery powered led strip lights, the kind designed for sticking under kitchen units etc. You'd have to manually switch them on, but it could be a cheap solution.

The batteries should last a long time as presumably you'd only be using them for a few minutes at a time then turning them off.


 
Posted : 10/12/2015 10:30 pm
Posts: 4331
Full Member
 

Not quite the same but I know of some one that fitted 12v down lighters into his boot lid interior, I've been meaning to do it to my car.


 
Posted : 10/12/2015 10:36 pm
 br
Posts: 18125
Free Member
 

I just bought a work-light from Aldi a couple of months ago.

Takes batteries, but based on how little it is on (mainly just the weekly night ride for getting ready), should last a fair while.


 
Posted : 10/12/2015 10:39 pm
Posts: 405
Free Member
 

I fitted two of the lights from this set to my wife's car - flush mount and thin

http://m.ikea.com/gb/en/catalog/products/art/70119425/


 
Posted : 10/12/2015 10:43 pm
Posts: 2007
Full Member
 

Oooo I've got a spare one of those ikea lights that didn't go in the kitchen... good idea, ta... ๐Ÿ™‚


 
Posted : 10/12/2015 11:30 pm
Posts: 5539
Free Member
 

Just get one of those LED bars that uses the cig lighter for power.


 
Posted : 11/12/2015 7:00 am
Posts: 10980
Free Member
 

Do the job properly. Intercept the feed to the interior light and take it behind the trim and up to somwehere useful then fit an LED light, earthing to the body. This won't stay on when you leave the car and an LED won't need a relay or an extra fuse.


 
Posted : 11/12/2015 9:17 am
Posts: 0
Free Member
 

I added a 30cm LED strip (Like this) just spliced straight into the wiring for the existing interior light pretty successfully

Yep, I stuck one of those to the side wall of one of the ribs that runs along the underside of the parcel shelf, such that it points straight down when the boot is open and the parcel shelf up. terminated with a jack plug. That plugs into a jack socket mounted in the bit of trim that the parcel shelf pivot sits in. wired up to the existing boot light.

Best mod ever.


 
Posted : 11/12/2015 4:01 pm
 P20
Posts: 4263
Full Member
 

I've got the larger version of this in the back on my Vivaro, huge improvement

[url] http://www.ebay.co.uk/ulk/itm/321866973186 [/url]


 
Posted : 11/12/2015 4:07 pm
Posts: 3401
Full Member
 

is it time for this again?

Silliness aside, the lighting in my newish car's boot is poor. I'd considered those velcro-on LEDs but usually just pop the torch or Joystick out of my coat to light it up.


 
Posted : 11/12/2015 6:24 pm
Posts: 6925
Free Member
 

Park next to a streetlight? HTH


 
Posted : 11/12/2015 6:26 pm