Forum menu
Topic starter
hi guys.just finishing my build and the deore one i already had snags the bottom linkage under compression.
cheers guys.
Posted : 30/08/2010 2:30 pm
Topic starter
is it a top swing i need.
Posted : 30/08/2010 3:18 pm
Topic starter
bump
Posted : 30/08/2010 6:31 pm
Posted : 30/08/2010 8:25 pm
Am using a Shimano SLX Top Swing M665 on mine
Posted : 30/08/2010 8:52 pm
Topic starter
thanks mike.
Posted : 30/08/2010 9:42 pm
Topic starter
anjs.does the clamp bolt sit very very close to the linkage when at full compression.
Posted : 30/08/2010 9:51 pm
Very close indeed - quite tricky to set up.
Posted : 30/08/2010 10:12 pm
Topic starter
yer collie iv,e noticed.iv,e pinched the m665 of my wolfridge and you can just about get it.it,s not perfect in regards to the height of the cage though.
which mech has the pinch bolt at the top....anyone..
Posted : 30/08/2010 10:26 pm