Topic starter
I'm rebuilding my 24" wheel which currently has a diatec QR hub 36 hole. I plan to rebuild with a 20mm hub with 32 holes, is this possible or a no go?
Posted : 26/01/2012 12:12 pm
You'd have a 32 hole hub and a 36 hole rim. It can be done but is not a very sensible plan at all and will cause problems with spoke lengths etc.
I wouldn't
Posted : 26/01/2012 12:16 pm
Topic starter
Ok I thought the same, just finding it hard to come across a used 36 hole shimano lock hub
Posted : 26/01/2012 12:20 pm
Yup, I can imagine.
Posted : 26/01/2012 12:21 pm
+1 on not doing what you thought of doing. You could get a 36 hole hub with a 6 bolt pattern and by a new disc.
Posted : 26/01/2012 5:09 pm
would it not be cheaper/easier just to move the wheel on and buy a new 26" wheel that's what you want?
Posted : 26/01/2012 5:10 pm
Topic starter
Would that work 26" on front 24" back? Going on a spesh big hit 05
Posted : 26/01/2012 9:45 pm
