Forum menu
right folks i have managed to get my fox 36 to not hold any air.
i done this by having the shock pump still engaged as i bounced on the fork (stupid i know). every time i pump them up then remove the pump the ar just comes out the shrader valve
question is what have i most likely done? need the forks to be sorted asap.
any suggestions greatly appreciated.
the valve core can be removed and checked / replaced
so take core valve out and try and see if it hold air or not let any through?
Take it out and see if its damaged - or just replace it.
You've messed up the valve, or it's stuck down with some gunge. Take pump off, have a gentle dig about with a needle and try again.
cheers guys.
I had a gentle dig around in the valve and it seems to be holding air now.
is it worth ordering a new valve or will it be ok now?
Go to your local car thingy shop, the ones that sell all the stuff that people put on their cars. Askl for some tyre valves; you will probably be able to buy the tool and some spare valves.