No pics yet then?
I was intrigued by this frame and also ordered one as was pretty cheap. Came with a faulty head tube unfortunately so is being sent back.
I asked Titus about the tyre clearance and they said :
Hello ****,
To make the chainstays as short as possible, there were some tire clearance issues as we needed to ensure that the bike had short chainstays but also crank clearance.
It isn’t against the seat tube that the issue lies – it is with the chainstay clearance.
The other issue is that a 2.1 in one tire brand measures like a 2.25 in others so we needed to be on the safe side to ensure that we don’t recommend 2.25’s and somebody puts a tire that may be listed as 2.25 but measure more like a 2.4.
I hope that is clear.
Thank you,
Michael
----------
Michael Golinski
General Manager
"
I only had a 2.2 conti mountain king kicking about and that was on fine with lots of clearance.
Sorry only got the one picture
[img] https://imageshack.com/i/n6foxngj [/img]
[IMG] 
[/IMG][/URL]
To make the chainstays as short as possible
At 458mm they're pretty damn long! Codeine has 440mm stays and Whyte T129 manages to get 431mm
Came with a faulty head tube unfortunately so is being sent back.
Dear me, hardly encouraging for any prospective purchasers regardless of the 'bargain' price
Yeah was a bit strange, i can only presume they got their Geometry a bit wrong.
But never had any problems with On-one before. And they have refunded, so all good.
Although I don't have any problem with Chainstay being that long though. But at that length you would think it should fit a bigger wheel. W
whooo knows
I was thinking about this and without seeing one I reckon it might be the front mech. On the 26 El Guapo who have to be very careful where you setup the front mech or it will cut into the stays.
I asked Titus about the tyre clearance and they said :Hello ****,
I'd be taking my custom elsewhere if I was greeted with that kind of language.
Hello ****
I'd probably go somewhere else if they swore at me too 😛
alexmces - Member I received my new EG frame last week. It looks awesome in the super raw finish, and with the CCDB it is more than a bargain. 3600 grs the 20" frame including the shock and the rear axle.Today I fitted the rear wheel: On One Smogashboard 2,25 mounted in Pacenti's DL 31 rim, and the answer is: YES, there is enough clearance for the rubber.I'm still waiting for some parts to finish the bike, and tomorrow I leave home for 2 week holidays, but as soon as I have it ready I will post some pictures and give riding impressions.
Any updates on the build/ riding impressions ?
Not sure if people are still interested. Iv ejust finished building my large elguapo 29er up. Ive got a vigilante trailboss 2.25 on the back on a wtb i25 rim. Clearance is fine just not wonderfull. There about 1cm between tyre and chainstay bridge and 2cm between the stays themselves and the tyres. I wouldnt want to go any bigger. Will post up a ride report after ive given it a couple of proper rides.
