Forum menu
Topic starter
Anybody know the trick to getting them out ?
Want to clean and grease the bearing but can't get these little nuggets out!
Posted : 19/04/2013 7:21 am
You have to rewind time and file a notch in one of them 😉
If this proves difficult then you just need to use the sharpest drift/screwdriver you have and try to get in between the two shims and tap them one out.
Posted : 19/04/2013 7:57 am
Topic starter
Cheers reggie
Posted : 19/04/2013 8:18 am