Rob, I'll check tomorrow as my list is at work.
I've just had an email from someone who wants 20 so, hopefully, I'll get to run another batch if that goes ahead 😀
Email sent for new batch waiting list. Cheers 🙂
Thanks Steve.If you have sent it out do you mind if i fire it back to for the next batch getting anodized.
Cheers.
Hi Steve, great looking bit of kit, can you add me to your next production run, I need 2 adaptors in black please.
Thanks Gary.
Hi Steve,
I would love one of these in black for my Thomson dropper!
Thanks,
Damien.
damien, drop me an email. I'm all out at the moment but hoping to do some more..
Ive just made an I-Spec B version, i can give you the drawing if you want to make them.
The final version is just printing on my Makerbot.
Phil, sounds interesting. Please drop me an email and we can discuss 🙂
I reckon that would work quite nicely with a Giant Contact Switch dropper too, but I'll have a closer look tonight before committing!
Got mine today! ?
Very happy. Will fit and post pics in a bit. ..
[img] 
[/img]
And....
Fitted. Seems pretty tight with slx breaks and a thomson remote as the slx leavers aren't all that long. Final positioning tbc.
Fits perfectly for my XFusion Hilo remote:
[img] 
[/img]
Used last night and it was great! Would be a little better if it had a clamp to fit, so you dont have to bend it apart or remove grips, but for £15, whos to complain!
Thanks Steve, great stuff 🙂
I'd like a couple of these please if you could add me to the next Batch?
Will email tonight.
Thanks, Ben.
Nice to see them arriving.
@superfli The idea was to keep it as minimal as possible and with most people using lock-on's these days it seemed the best way with the screw position. Most shifters etc you need to take the grips off to remove them so didn't seem like an issue. Hope you don't need to take your grips off too often..
Stevie - have you tried it without the locking bolt? - seems to work just fine using the force from my thomson remote - may make it lighter / cheaper to make?
Not tried it without the screw but it's a good tip for the weight-weenies out there. With the screw you can leave the adaptor in place if you want to take the dropper/remote off.
I normally take mine off for uplift/DH days but can leave the adaptor on for when I put the dropper back on.
Got mine today great Thanks
Got mine too. Many thanks.
Got mine today, lovely black anodized one, nice job Steve!
Cheers
Got mine today, lovely black anodized one, nice job Steve!
Cheers
+1
Nicely made Steve, thanks.
Having trouble getting it placed with a KS Lev. Lever is short, fat and has a long firm throw (especially for release), really needs rotating up a bit then it clashes with other stuff. Suspect the Thomson lever is more suited to it, will explore when that bike is back from having its rear end sorted.
Hmmm - this is ace but I forgot about the ESI grip removal nightmare...
Good work tho Steve. Very professional
Yes, quite! I think ESI are fit and leave until you destroy them.
Got mine today.Thanks Steve.
Really really well made piece of kit.Well done. 😀
Anyone finding that if used with a 2x10 setup it's tricky to get the dropper remote in the perfect spot ergonomically. If I place it next to grip and then I'm moving the brake lever more inboard than I like and vice versa the dropper remote is too close to my slx shifters if I put the brake next to the grip,
I assumed it was meant really for 1x set ups, for that exact reason.
Due to my old knees and the need for a granny ring where I ride I'm afraid 2x10 it is, so if anyone would like a black anodized adapter email me, address is in profile.
Is there any more of these going in black?
I'm going to be doing some more bazza. Fudge, sorry it didn't work well for you. If you want to send it back I'm sure I can sort out something sort of refund..
Sorry if it's been asked. Do they work ok with Specialized Command Post levers?
If so, I will take one from the next batch of black ones.
If the fit, I will take the one from Fudge?
If they don't fit I'll take fudges one off his hands!
Emailed you [b]stevied[/b]
Did we ascertain of they fitted the command post mount?
Anyone got a pic of the adaptor with the KS (or other) remote fitted? I seem to have deleted mine and wanted to add some to the other thread so people can see what it will work with...
Cheers
Steve
Looking at the size of the Command Post remote, it looks like it will fit. The adaptor has a 12mm wide clamping section for the remote clamp band.
akira, if you want, I'm happy to do one for you and, if it doesn't fit, give you a refund (less postage)
Hi Steve, got any more of these available?
got any more of these available?
Not at the moment but hoping to do some more soon. Bit busy with normal stuff so will do a post to see if there's enough interest to look at booking some machine time.
Now I finally have a dropper I'll watch with interest 😉
Anyone got a pic of the adaptor with the KS (or other) remote fitted? I seem to have deleted mine and wanted to add some to the other thread so people can see what it will work with...
Cheers
Steve
Do you still need this? I posted a picture of mine with a KS remote on the other thread, feel free to use that, or I can email it to you.
I'll have on next time round please - ano black if possible
Thanks TGA, found mine in the end 🙂
