Forum menu
Topic starter
My standard shimano jockey wheels on my SLX 9 speed rear mech are goosed, am going to replace them with some Tacx sealed bearing type ones. Can I use the original bolt/screw thats in there ( are the hole sizes in the original shimano wheels the same bore size) or do I need to get anything else other than the pair of jockey wheels. Thanks
Posted : 08/07/2012 7:26 pm
Just the jockey set will be fine...re-use the old bolts.
I would get the BBB jockeys from Dotbike.com for approx £12.
Fill the bearings with grease before fitting.
PaulD
Posted : 08/07/2012 7:28 pm