Forum menu
Take it the brake levers / shifters will foul the top tube?
If you have a spill, it would leave a nasty mark 🙁
Looks nice tho............
Steve, don't know mate, fitted my giant with 30mm of spacers, the hello with even more space. I'm assuming you're OK interested in buying?
Alan, no fouling mate currently, if it does I will fit the risers again.
Approx 168mm
Thinking of getting a spearfish, but can't afford new forks so I'd have to check.
Good old CRC got the part to me bright and early...
So, i rekon i'm happy with that... However i'm prepared to bow to the knowledge of the forumites.... but looks appropriate to me.
I accept i've got no spacers, therefore no room for adjustment, it's just one of them things, i'll improvise using higher/lower/longer/narrower bars i guess...
What say the masses ?
[IMG] 
[/IMG]
[IMG] 
[/IMG]
Stem fits ....
Shame its orange
Looks fine. You'll only know if you can't get rid of that rattly headset feeling.
LOL it was orange on purpose. I was torn between the orange and the black.... Orange works IMO.
Sadly, someone who mentioned the bars fouling the top-tube on full turn was correct, so i'll be fitting the risers before trip..
Orange bars too much orange to be appropriate ?
This thread makes me spearfish-curious.
Be sure to post up how you like it, and what bikes you're comparing the ride to.
the stem is fine
Orange bars too much orange to be appropriate ?
Noooo.. It'll be fine, what about an orange saddle, grips and seatpost too?
😯
you can't have too much orange 😉
[img] 
[/img]
8) lush...
of course you can take it too far and forget a downtube and get the seat angle all wrong. Oh., and fit the drivetrain the wrogn side of the frame.
[img] 
[/img]
OK ok.... fair point.... black bars
Heh heh.. 😉
Well, that's the bike done and ready.
Took to my lbs to check fork stuff and he's happpy.
Fitted rear brake.
Cable tied it all up etc. Lovely
Black stem with Orange bars might have worked.......
Having 2 shades of Orange so close, they really need to match.
IMO Of course 🙂
come on then
piccies of it finished please, I have been waiting days for this to culminate into a complete bike
😀
Bars hitting the top tube you say.....
I have fitted these to my bikes where the top tube is at risk. Small price to pay to protect a lovely frame.
[img] 
[/img]
And just to clarify... Those are not my legs in the picture.
Oh and the spearfish frames... We're £1000, now a remarkable £640 ish... http://www.charliethebikemonger.com/salsa-spearfish-29er-full-suspension-frame-692-p.asp
Sorry lads, no pics tonight as it is dark.
Power cut or have you been kicked out of the kitchen?
Lol Tim, like that was a long term thing
Just splurged a little cash out and bought a Renthal 32T chainring as it's only ever going to run single ring and a SLX SGS Shadow + rear mech in a medium cage. My rear mech is 18 months and 2000+ miles old, so may as well treat the bike.
come on - it's daylight now 🙂
LOL i'm in work mate, start work at 7am. So was obviously dark when i left the house.
Promise i'll get some pics tonight when i get home, even if i have to bring into the kitchen, i want to give the bike a quick test anyway in the road to check geometry, seat position and handlebars comparing to the risers.
Well here's the final pic and final spec (needs a few bits fitting when they arrive)
Salsa Spearfish, size large.
Hope Pro2 Evo with Crests.
Bontrage Mud-x
Formula Mega (rear)
Formula K18 (Front)
Formula rotors
Fox float 32 F100 / 15mm maxle
XTR Bottom bracket mounted in PF converters to standard BB.
Rockshox Monarch
SLX 10 speed shifter
Shimano full lenght gear cable.
Deore cranks running a 32T
SLX cassette 11-36
SRAM generic chain
Superstar XCR-st chainguide
Funn fatboy riser bars
Hope Headset
Ragley stubbing stem
Well B-54 pedals
Giant lock-on grips
Salsa seatclamp
Charge Spoon
To be fitted : SLX shadow+ rear mech. Renthal 32T chainring.
[IMG] 
[/IMG]
Riding the bike in the street, i'm VERY happy with how it rides... it's a lovely bike/shape/position. However, i've swapped the bars off from this photo to risers due to issues hitting the top-tube of frame with the bottom of shifter. I'll decide on Thurs (working from home) which set of bars i prefer to ride with and set accordingly.
Looks ace mate! 🙂
Got me thinking now...........
glitchy bump test sure I posted on here last night.
[edit] oh, apparently not. Or did I get moderated for noticing the table?
[2nd edit] there's two threads with this picture in 😳
Yeah sorry mate, i realised i'd update the problem thread instead of the build/new frame thread.