Topic starter
Need help got Mavic crossmax slr wheels running 9 speed fine.
Gone to put 10 speed cassette on and once its done up tight enough it binds and dosnt spin round freely .
If i take away the plastic ring that goes at back of cassette it does up tight enough but then cassette is loose and wobbles.
Any help would be great.
PN
Posted : 09/03/2013 11:50 am
you need a spacer on the inside of the cassette.
Posted : 09/03/2013 11:52 am
Topic starter
would they be the same as the spacers used in the single speed covertion kits, as ive got one of those in shed.
if thats all i need thats great.
will have another go at fitting tommorow.
Thanks for help.
PN
Posted : 09/03/2013 12:01 pm
i think so. i've used a BB spacer before. anything about 2mm thick will do
Posted : 09/03/2013 12:32 pm
