Forum menu
Contemplating some of those 9mm superstar skewers.
What bits do I need to convert my hubs.
Just using conventional qr at the moment.
First things first, you need to look for a 9mm front axle and 10mm rear, these are the standard sizes a QR frame and fork will take.
You mean Pro2 Evo hubs, right?
All you need is new adapter inserts.
Front 9mm: http://www.chainreactioncycles.com/hope-pro-2-conversion-kit-9mm/rp-prod40654
Rear 10mm: http://www.chainreactioncycles.com/hope-pro-2-evo-rear-hub-conversion-kit/rp-prod68578
Make sure you select the 10mm Bolt Thru for the rear one as the option.
Ta.
First things first, you need to look for a 9mm front axle and 10mm rear, these are the standard sizes a QR frame and fork will take.
Fork dropouts can only take 9mm axles, whereas rear dropouts can take 10mm axles. So, as Rusty Mac says, you will need a 9mm front axle and a 10mm rear.
Just to reiterate daniel groves reiteration of rusty mac's comment 😉