Forum menu
Topic starter
Finally decided to strip the drive train apart to find the clicky noise and discovered this... a first for me
[img] 
[/img]
Posted : 26/08/2015 4:51 pm
blimey !!!!
Posted : 26/08/2015 5:13 pm
Good effort, that bearing is mangled. What part is it from?
Posted : 26/08/2015 5:19 pm
BB
Posted : 26/08/2015 5:20 pm
If that is a BB bearing i'd be taking a very good look at the axle/spindle of your cranks to check it is not damaged.
Posted : 26/08/2015 5:53 pm
Topic starter
Thankfully the cranks look good, first thing I checked after seeing the bearing. I've written a pair of cranks off in the past with a seized bearing that just span on the axle..
I reckon those bearings are 2 years old and have stood up to 2K of mileage and a majority of that as a singlespeed... This was the drive side that had gone.
Posted : 26/08/2015 11:44 pm
Chapeau!
Posted : 27/08/2015 4:29 am