So a 11-36t 10 speed cassette and a 105 cx mech

steve_b77

Posts: 10498

Free Member

Topic starter

Translate ▼

[IMG] [/IMG]

I thought that with the 3 Peaks coming up I'd see if it fits, the jockey wheels just clears the cassette in the 36 and it shifts up and down the block ok.

Waddya reckon?

Posted : 09/09/2016 4:06 pm

cp

Posts: 8970

Full Member

Translate ▼

Looks pretty good and if it works fine then go with it

Posted : 09/09/2016 4:12 pm

steve_b77

Posts: 10498

Free Member

Topic starter

Translate ▼

Winner, it looks like the hanger is pretty long the mech is miles away in the smallest cog

Posted : 09/09/2016 4:24 pm

ampthill

Posts: 9963

Full Member

Translate ▼

The knew Spec' Sequoia elite runs at 105 gs and 11-36 block.

https://www.specialized.com/gb/gb/bikes/adventure/sequoia-elite/116169

I wonder if Spec' had a wobbly at Shimano over recommended standards after the 132.5mm hub "isuess"

Posted : 09/09/2016 8:06 pm

duner

Posts: 66

Free Member

Translate ▼

9SP MTB mech will also work

Posted : 09/09/2016 8:29 pm

boxelder

Posts: 6851

Full Member

Translate ▼

As above, I've been running 9 spd XT mech on all manner of 10 speed cassettes on the CX bike. It still won't stop the PyG death cramp 😆

Posted : 09/09/2016 8:37 pm

Forum menu

[Closed] So a 11-36t 10 speed cassette and a 105 cx mech