Forum menu
Going to singlespeed by hardtail and was wondering what spacer and cog kit to get for the rear. I have a hope pro 2 evo rear hub and so a bit worried about the cog digging into the freehub. Looking for suggestions of good singlespeed cogs that dont dig in, and any spacers/tensioner advice also.
You'll need a cog with a wide base, otherwise it will chew the freehub up for definite.
Quite a few companies do them now, notably On One and Superstar, but there are others too.
Doing the same thing myself, got a Gusset ring which has a solid base to it.
I went for this http://www.charliethebikemonger.com/bikemongers-complete-kit-1-p.asp when I converted my old bike to SS
You won't need cogs, [b]sprockets[/b] is what you're after
Cogs run with cogs
Sprockets run with chains.
And its Charlie the bike monger you'll need to speak to. Ask him about the 29er fatbike SS trike he's developing with Surly.
Surly ones are ace and last ages.
Surly sprocket and a nice set of spacers from Charlie the bikemonger or Velosolo. I had a Gusset kit on my roadrat and the sprocket isn't great and has a pretty narrow base. If you don't want to spring for the Surly then On One Groove Armada are also worth a look and have a pretty wide base
Another vote for Charlie. Drop him an email and he'll give you spot on advice.
Another vote for charlie the bike monger. Most helpful.
Thanks a lot, will have a word 🙂
I went for a Gusset 'Double Six' SS kit, nice double width sprocket base to stop it digging into the hub 😀
Ssjeff, cogs are the teeth on a gear, but it is nice to see an increase in engineering pedants 🙂
Surly and VeloSolo get my vote
[url= http://farm7.staticflickr.com/6055/7030318631_b515428c3d_b.jp g" target="_blank">
[url= http://www.flickr.com/photos/rocketdog/7030318631/ ]singlespeed[/url] by [url= http://www.flickr.com/people/rocketdog/ ]rOcKeTdOgUk[/url], on Flickr