[Closed] Show me your DIY bike spray jobbies

There's a big paint thread on Pinkbike somewhere...

I resprayed the tail and mudguard on this , does this count 😉

[IMG] [/IMG]

No. But I like it anyway

After the grief this caused me I won't be painting anything again in a hurry 😉

i researched a while ago and came to the conclusion that if you want a good job, take it to a professional (often cheaper, and much much less hassle). Its only really worth it if you want a quick and dirty respray for a city bike.

That said, this looks ok (from a distance) and its just a tin of hammerite...
http://oranj.wordpress.com/links/town-bike/

There's a big paint thread on Pinkbike somewhere...

🙂

[IMG] [/IMG]
My rendition of the Vandeyk Night Stream. Actually a DMR Switchback.

I sprayed bmx's when I was a kid, it was good fun and gave a certain satisfaction.

By the time you've bought all the materials though (maybe 2 cans of colour, 1 lacquer, a wire brush/paint stripper for prep, some sand paper, etc) you might as well get it powder coated.

It'll also look decent and last.

I can spray, and have boxes of stuff to do it with. Just like some inspiration as to colours as I've not tried a bike!

Coming to a track near you.... ONE DAY!
[img] ?t=1343229233[/img]
[img] ?t=1343229234[/img]

Hammerite from aerosols:

[url= http://farm7.staticflickr.com/6044/5891485937_d0b37035db_z.jp g" target="_blank">http://farm7.staticflickr.com/6044/5891485937_d0b37035db_z.jp g"/> [/img][/url]
[url= http://www.flickr.com/photos/53860438@N06/5891485937/ ]IMAG0006[/url] by [url= http://www.flickr.com/people/53860438@N06/ ]Northwindlowlander[/url], on Flickr

Proper job:

[url= http://farm7.staticflickr.com/6160/6255892980_f031dc3890_b.jp g" target="_blank">http://farm7.staticflickr.com/6160/6255892980_f031dc3890_b.jp g"/> [/img][/url]
[url= http://www.flickr.com/photos/53860438@N06/6255892980/ ]IMG_0103[/url] by [url= http://www.flickr.com/people/53860438@N06/ ]Northwindlowlander[/url], on Flickr

Just the front beam on this bike but done with Plastikote which I've used for load of other things like forks, etc and is pretty hard wearing.

[img] [/img]

1. rub down existing paint with reasonably fine wet/dry - just enough to key, not enough to actually take the old paint off as there's no need
2. clean/degrese thoroughly (I use water then meths)
3. 3+ thin coats of spray paint
4. Clear lacquer if you want (I rarely bother)

[IMG] [/IMG]
Rattle can jobby, not got a picture of it resprayed with a white swing arm