Forum menu
Seat post for Bfe?
 

[Closed] Seat post for Bfe?

Posts: 0
Free Member
Topic starter
 
[#6701869]

Hi all,

I've got a Bfe with RS Sektor's on it, my problem is that even at the 120mm travel setting my saddle points up a little. I bought a cheap 400mm seatpost (Funn iirc) when I built the bike up, but it doesn't adjust enough to get the nose level.

What does everyone else use to avoid this?

Cheers
Matt


 
Posted : 12/12/2014 6:10 pm
 cdoc
Posts: 0
Free Member
 

I have a raceface respond on my Bfe with 140mm revs and it is fine.
You sure the post is the right way round?


 
Posted : 12/12/2014 6:23 pm
Posts: 0
Free Member
Topic starter
 

Thanks cdoc, yep, it's defo the right way round, and reversing it doesn't help. it just doesnt have the angle adjustment. I'll have a look at the Respond then.
Cheers.
Anyone riding anything else?


 
Posted : 12/12/2014 6:28 pm
Posts: 54
Free Member
 

I've got a reverb on mine.

Check if the post or clamp is facing the right way.. I made the mistake on my reverb ๐Ÿ˜ณ


 
Posted : 12/12/2014 6:29 pm
Posts: 384
Full Member
 

Crank Bros Cobalt on mine, no problems with the seat with 150mm forks.


 
Posted : 12/12/2014 7:05 pm
Posts: 715
Free Member
 

Reverb and Thomson used on mine. Both have enough tilt either way.


 
Posted : 12/12/2014 7:08 pm
Posts: 3722
Free Member
 

KS 950 and some cheap old Bonty on mine. Surprised any post would give the problem you describe on a BFe.


 
Posted : 12/12/2014 8:32 pm
Posts: 963
Full Member
 

Thomson was rubbish on mine, kept slipping.


 
Posted : 12/12/2014 8:45 pm
Posts: 0
Free Member
 

Kronolog on mine


 
Posted : 12/12/2014 9:11 pm