Forum menu
Topic starter
I've just discovered that it's not my BB creaking, the irritating noise is coming from the seat post under load. I'm running a KS Lev post 27.2 into a Ti frame. Anyone got any ideas how to sort this out other than tightening the seat post clamp?
Posted : 14/09/2015 8:21 pm
When this happened to me it was a simple remove, clean, regrease.
Posted : 14/09/2015 8:22 pm
You could try carbon assembly paste.
If you tighten the clamp to much it will probably stop the post returning.
Posted : 14/09/2015 8:24 pm
Carbon paste and grease all the threads on the seat clamp bolts as they can creak and the rails too!
Posted : 14/09/2015 8:27 pm
Try blue instant gasket (Hylomar ?) instead of grease.
It sets slightly, more than grease at least, allowing less movement I guess.
I've had some success with that a few times in the past
Posted : 14/09/2015 8:29 pm
Topic starter
Thanks team! 🙂
Posted : 16/09/2015 12:31 pm
Ipod.
Posted : 16/09/2015 1:11 pm