Forum menu
Topic starter
Got down to the metal on a wet ride and as a result I have marked my brake rotor.
Will it make any difference in performance?
Posted : 09/05/2009 4:27 pm
yes.its abrake disc
Posted : 09/05/2009 4:29 pm
Topic starter
Catastrophically or just a little bit?
A little bit I can live with.
Posted : 09/05/2009 5:21 pm
I would imagine it'll just eat pads a bit quicker.
Posted : 09/05/2009 5:24 pm
Topic starter
Ta.
Posted : 09/05/2009 5:38 pm
If you can feel the marks with your fingers, like they have rough burred edges, then just wrap some very fine wet'n'dry around a steel rule and gently sand smooth. If the marks don't have burrs then ignore them, 'cos sintered pads will smooth them over time anyway. Don't worry too much about it.
Posted : 09/05/2009 8:24 pm
Topic starter
Ta again.
Posted : 09/05/2009 8:31 pm
What CountZero said.
Posted : 09/05/2009 9:06 pm