[Closed] Rotor bolts

Use a hacksaw to make a groove across the top of the rounded rotor bolt, then use a screwdriver to remove.

I will give that a try.

Thanks

You're better off filing a bit of a flat onto 2 sides then using a pair of molegrips/stilsons with the teeth in good nick. IME.

If they are hex heads you can usually tap in a slightly larger Torx bit & get enough purchase to slacken them
Worth trying before you resort to cutting tools

i used an angle grinder 😳

There's only one way to do it proper like.

[img] [/img]