[Closed] rohloff on a standard dropout?

Absolutely, you'll just need to use the chain tensioner.

bencooper, like this? no oem plates or anything else

You'll need a Rohloff Speedbone and the corresponding axle plate, which look like this;

[img] [/img]

And the whole thing will end up looking like this;

[img] [/img]

Yes, other side you'll need the OEM2 plate and Speedbone or Monkeybone - in your pic I presume they're using the Monkeybone. Generally neater that way.

Would it be against the rules to say that I still do a STW subscriber discount? 😉

Needless to say, you don't have to use a Rohloff tensioner.
Other tensioners are available at about 1/3 the price.
This is the Gusset tensioner on our tandem.

[img] ?oh=727431c6e08156c0de61db9c535c4371&oe=5516B5A0[/img]

http://cyclemonkeylab.blogspot.co.uk/2013/04/rohloff-equipped-surly-disc-trucker.html

like this

Oh yes, I forgot the Surly dropouts had a hole for the OEM2 plate - so you won't need the Monkeybone or Speedbone, just the OEM2 plate on the Rohloff.

And a tensioner.

bencooper, you sell rohloff?

Yup, do loads of them - over half the bikes I do are Rohloff bikes 😉

thanks for your help. i will be in touch.

No worries 😉