Forum menu
Replacement Mavic S...
 

[Closed] Replacement Mavic Spokes

Posts: 0
Free Member
Topic starter
 
[#7719364]

Bit of a long shot I'm trying to keep my 2004 Mavic crossmax 26" enduros going for a bit longer but need to replace a couple of non drive side rear spokes, spoken to Mavic they no longer have spares so suggested posting on here.
Any ideas where to try ?


 
Posted : 20/03/2016 9:54 pm
Posts: 6761
Full Member
 

Tried eBay ?

Can you measure it, I have broken a couple of Mavic wheels, st and deemax.

What's the spoke length ?


 
Posted : 20/03/2016 10:32 pm
Posts: 0
Free Member
 

I should have a few Crossmax Sx spokes, not sure of the year, fancy grey rims with script writing and white hubs.


 
Posted : 21/03/2016 12:23 am
Posts: 3618
Full Member
 

I have 2005 crossmax xl's. Mavic don;t do the correct length for one of the rear sides but there was one that was a few mm too long. I got this and filed the hub end slightly.

The spoke was from a 2006 sx.

I was a bit worried about it, but its been fine for a few years.

I bought a spare front wheel to use for spares.


 
Posted : 21/03/2016 8:51 am
Posts: 0
Free Member
Topic starter
 

Cheers for the reply's, spokes measure 279mm


 
Posted : 21/03/2016 11:55 am
Posts: 6761
Full Member
 

So, I have some from a DeeMax wheel, 279mm

Are you looking for the standard wire thickness ones or the fatter, chunkier round ones that Mavic used on Crosmax ST etc etc ?

The ones I have are the usual wire type without a J bend, they just have a flattened stubby bit.


 
Posted : 21/03/2016 12:15 pm
Posts: 0
Free Member
Topic starter
 

rickmeister just re read my last post, typo error spoke length should have read 273mm....LBS has come up trumps too thanks for your input.


 
Posted : 22/03/2016 9:51 pm