Topic starter
Do i need a special octalink tool, or should my old style square taper crank puller work? The middle pushy bit seems a bit small.
Posted : 20/10/2009 1:42 pm
The middle pushy bit seems a bit small.
Use a 5p piece to make it bigger
Posted : 20/10/2009 1:44 pm
Or you can buy a shimano adaptor for a couple of quid, but the 5p idea sounds a good one.
Posted : 20/10/2009 1:48 pm
Topic starter
didnt think of that. will give it a go.
Posted : 20/10/2009 1:48 pm
