[Closed] Recommend me: silver single ring specific cranks that'll take 38T ring

I've got some Raceface Evolve DH with a 38T DMR ring & RF BB for sale from my Rohloff set up - email in profile.
[img] [/img]

I need 170 cranks, they look mahoosive, and a bit agricultural for my needs, but thanks all the same snaps.

It's to replace these:

[img] [/img]

Can't help with other suggestions, but there were some ENO cranks for sale in another thread - I can't find the thread right now, but the seller was LittleBoyLuke@aol.com.

Cheers finnegan, but they were 175

Campag Centaur ultra torque, stiff, light, completely serviceable BB (takes 10 mins to grease the bearings) and pretty sure you can find a 38t ring for them, but the compact comes with a 34t and something big.
[img] [/img]

Quite like that tinsy, any more purchase info, and does that mean I can use one of those new CK headsets (same as Shimano etc compatibilty)?

Middleburn are making (make?) 38t unos for rolhoff use - give them a call?

Intersting IA, I emailed Middleburn last week and White Ind, only the latter have responded. I'll try calling them before making a descision. ta

Middleburn do a 38. I have used 34 and even 32 with my rohloff. 34/15 or 34/13. You would need to be superhuman to break it in my opinion and I don't really miss the absolute top end...like the campy idea though, a little bit different, but whats the chainline? roady chainline is usually somewhat narrower?

I'll let you know how I get on calling Middleburn later - they've still no replied to last weeks email. I've got the gearing spot on for me 38*16.
Good point on the campy road rings - guess other rings may fit it?

A Shimano standard road crankset (Ultegra/105) comes with 39/52T rings if that'd be manageable?

I've just got these. That's a 44t ring.

[img] [/img]

Update:I called Middleburn and found them very helpful, they do indeed do a 38T ring for the Uno, trouble is the chainline on SS is much different to running a Roholff, it can be done but bottom bracket lenths would need to be changed to suit. The Rohloff sprocket is right on the edge of the hub, where as a SS is further in towards the hub. An RS7 arm with a 'Dual' spider is the way to go - apparently!