Forum menu
Topic starter
My azonic pedals ate a DU bush in the drive side pedal. I rebuilt the pedal with new bushes and bearings and used lithium grease.
One wet ride later and its clicking again.
Should i have used the thicker red (teflon) grease?
Ta!
Posted : 26/01/2009 8:01 pm
Lithium grease is too thing.
Try Teflon grease - its more sticky and should stay put.
But a word of thought - the axel might be worn which might be why its wrecked a new bushing so quick.
Posted : 26/01/2009 8:48 pm
Topic starter
i measured the axels with a micrometer and fitting a new bush instantly removes the issue. for the price of a new DU bushing, i'd rather try repairing them than buying a proper azonic pedal kit or buying new ones
Posted : 26/01/2009 8:50 pm
Just try some Teflon greese then - or rock n roll super web if you can find it.
Lithium is too thin.
Posted : 26/01/2009 9:05 pm