Forum menu
Reba pressures - wh...
 

[Closed] Reba pressures - what are you running?

Posts: 193
Free Member
Topic starter
 
[#301828]

100mm travel
Pos and neg


 
Posted : 13/02/2009 11:07 am
Posts: 0
Free Member
 

130psi +ve and -ve at 115mm - I'm 16 stone


 
Posted : 13/02/2009 11:15 am
Posts: 0
Free Member
 

115m of travel, 14 stone 110psi in both +ve and -ve.


 
Posted : 13/02/2009 11:19 am
Posts: 46087
Free Member
 

100mm 29ers and am 14st with 110 in both iirc


 
Posted : 13/02/2009 1:13 pm
Posts: 0
Free Member
 

100mm travel

80 positive, 90 negative

I'm 10.5 stone - extra negative for small bump responsiveness

Tim


 
Posted : 13/02/2009 2:05 pm
Posts: 0
Free Member
 

80+, 70-, 11st


 
Posted : 13/02/2009 2:08 pm
Posts: 0
Free Member
 

80psi in both, 11st. When they're new you might benefit from running more in the neg chamber and lower pressures overall as the seals take forever and a day to bed in.....but last a reassuringly long time!


 
Posted : 13/02/2009 2:18 pm
Posts: 19914
Free Member
 

It depends on FAR too many variables to just ask what other people are running:
What bike, how much weight on the front, type of fork (U-turn or Dual Air, the chambers are slightly different)..... etc
Just trotting out air pressure settings and bodyweights means very little

The only way is to measure and set the sag properly yourself. I'd go for 20-25mm on a 100mm fork, but then you might like a bit more or less then that.


 
Posted : 13/02/2009 2:33 pm
Posts: 0
Free Member
 

Reba SL 100mm's. 125 +ve/-ve both sides and I'm 14st, have been round Llandegla at 100psi both sides and only just bottomed them out.


 
Posted : 13/02/2009 8:23 pm
Posts: 242
Free Member
 

I had Team rebas on a medium superlight 08s i ran them 110pos-neg90.Not a great fork not bad either.


 
Posted : 13/02/2009 8:45 pm
Posts: 0
Free Member
 

Set the +ve based on sag (25-30%) and then put the -ve 10 more than the +ve.


 
Posted : 13/02/2009 8:49 pm